How to replace the EGR valve on 2003 GMC Savana 2500?

To fit the EGR valve, slide off the air cleaner assembly and make a disconnection the EGR electrical connector. Remove the valve and clean on the gasket. Install a new flange gasket and EGR valve and attach the fasteners as required. Install the electrical connector and air cleaner assembly again.

OEM 2003 GMC Savana 2500 EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 EGR Valve found

View related parts
2003 GMC Savana 2500 Throttle Position Sensor Part Number: 12576918
Product Specifications
- Other Name: Valve, Emission Control System; EGR Vacuum Solenoid; EGR Valve; Valve, Emission Control System(EGR Control)
- Replaces: 17113278, 17113575, 12568582, 17093020, 17096188, 17113619, 17113618, 17113303, 17113615, 17113405
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.4 x 4.9 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12576918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Savana 2500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

2003 GMC Savana 2500 EGR Valve

With a comprehensive array of OEM 2003 GMC Savana 2500 EGR Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Savana 2500 EGR Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Savana 2500 EGR Valve Parts and Q&A

Q: How to replace the EGR valve on 2003 GMC Savana 2500?
A: To fit the EGR valve, slide off the air cleaner assembly and make a disconnection the EGR electrical connector. Remove the valve and clean on the gasket. Install a new flange gasket and EGR valve and attach the fasteners as required. Install the electrical connector and air cleaner assembly again.