Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2003 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
GMC Savana 2500 EGR Valve
Our website offers an extensive catalog of genuine GMC Savana 2500 EGR Valve at unbeatable prices. Every OEM GMC Savana 2500 EGR Valve comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 2500 EGR Valve Parts Questions & Experts Answers
Q: How to replace the EGR valve on GMC Savana 2500?
A: The repair process starts with negative Battery Cable disconnect while also removing the air cleaner assembly. Write down the present position of the linear EGR Valve while indicating its necessary position should remain at 180 degrees from its original position. Remove the linear EGR Valve from the flange by unbolting it while ensuring you avoid exposure of its electrical component to liquid cleaners or solvents. The removal process of the linear EGR Valve requires you to take off both the flange gasket as well as the EGR Valve gasket surface should be cleaned before reinstall. New flange gaskets should be inserted before installing the linear EGR Valve by fastening it to its position with bolts. Make two sequential tightening passes on the bolts starting from 10 n.m (89 lb in) then finishing at 25 n.m (18 lb ft). Using a new gasket place it between the flange before installing the linear EGR Valve and bolts. Begin by reconnecting the EGR Valve harness connector followed by air cleaner assembly reinstallation before reconnecting the negative Battery Cable.