OEM 2004 Buick Park Avenue Crankshaft Position Sensor

2004 Buick Park Avenue Parts Questions & Experts Answers

• Q: How to replace the Crankshaft Position Sensor on 2004 Buick Park Avenue?

  A: You should start by disconnecting the negative Battery Cable while hoisting the vehicle to replace the crankshaft position (CKP) sensor. First remove the right splash shield cover then disconnect and remove the crankshaft Harmonic Balancer from the vehicle. Securely remove the Crankshaft Position Sensor shield without any pry bar tools before disconnecting the sensor electrical connector. Take off the Crankshaft Position Sensor from its block face position by removing its two securing bolts. Position the ckp sensor to the block before installing its bolts and tighten these to 30 n.m (22 lb ft). First, reinstall the Crankshaft Position Sensor shield before connecting the electrical connector of the ckp sensor. Mount the crankshaft Harmonic Balancer onto the crankshaft before installing the right splash shield cover. Depress the vehicle then reconnect the negation cable before executing the crankshaft position (CKP) system variation learn.