How to Replace the Rear Wiper Motor on an XUV on 2004 Buick Rainier?

Before installing a new rear Wiper Motor you need to take off the Wiper Arm and weatherseal from their position on the motor pivot shaft. First you should detach the inner trim panel from the endgate area and then pull out the rear endgate window. Detach the Wiper Motor electrical connector before you take off the Wiper Motor bolts and nuts (1, 3) that link the endgate assembly for motor removal. Put the Wiper Motor in place on the endgate then attach it with two bolts at 8 n.m torque. Attach the nuts to their locations and apply the specified tightening force. Install the Wiper Motor electrical connector while putting back the endgate window. Then place the trim panel back onto its proper position on the endgate. Put the spacer in the correct position at the Wiper Motor shaft and put back on the Wiper Arm. Check that the rear wiper system runs correctly as the last step.

OEM 2004 Buick Rainier Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
2004 Buick Rainier Wiper Motor, Rear Part Number: 25805561
Product Specifications
- Other Name: Motor, Rear Window Wiper; Rear Motor; Motor, Rear Window Wiper/Washer
- Position: Rear
- Replaces: 15198956, 12487694, 15094706, 15229806
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.5 x 8.4 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25805561
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Buick Rainier Motor & Linkage Part Number: 19355989
Product Specifications
- Other Name: Module; Wiper Motor; Front Motor; Module, Windshield Wiper Motor
- Replaces: 12487687, 12487688, 15094705, 15812054, 15214344, 88958236
- Item Weight: 9.00 Pounds
- Item Dimensions: 37.1 x 7.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19355989
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Buick Rainier Motor & Linkage Part Number: 19354908
$192.90 MSRP: $346.00
You Save: $153.10 (45%)
Product Specifications
- Other Name: Module; Front Motor; Cover; Module, Windshield Wiper Motor
- Replaces: 15878429, 88958237, 15094704, 12487689, 15812497, 15214343, 12487690
- Item Weight: 10.70 Pounds
- Item Dimensions: 36.7 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19354908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2004 Buick Rainier Wiper Motor

With a comprehensive array of OEM 2004 Buick Rainier Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Rainier Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Rainier Wiper Motor Parts and Q&A

Q: How to Replace the Rear Wiper Motor on an XUV on 2004 Buick Rainier?
A: Before installing a new rear Wiper Motor you need to take off the Wiper Arm and weatherseal from their position on the motor pivot shaft. First you should detach the inner trim panel from the endgate area and then pull out the rear endgate window. Detach the Wiper Motor electrical connector before you take off the Wiper Motor bolts and nuts (1, 3) that link the endgate assembly for motor removal. Put the Wiper Motor in place on the endgate then attach it with two bolts at 8 n.m torque. Attach the nuts to their locations and apply the specified tightening force. Install the Wiper Motor electrical connector while putting back the endgate window. Then place the trim panel back onto its proper position on the endgate. Put the spacer in the correct position at the Wiper Motor shaft and put back on the Wiper Arm. Check that the rear wiper system runs correctly as the last step.