How to Replace an Antenna Cable for Extension Cable on 2004 Buick Regal?

Begin antenna cable replacement by taking out the right instrument panel (I/P) insulator then carefully moving the right carpet side to reach the wiring harness. First disconnect the I/P antenna cable from its connection to the body harness antenna cable afterward remove the I/P compartment and the radio. The routing path of the replacement I/P antenna cable requires termination of cable visibility at both the radio end and front door hinge pillar exit point from the I/P wiring harness. The new antenna cable needs to be attached to the harness at least every 150 mm (6 in) distance to properly protect and guide the cable using electrical tape installation along the wiring harness exterior. After connecting the I/P antenna cable to the radio you should relocate the radio. After hooking the I/P antenna cable to the body harness antenna cable located at the front door hinge pillar you should reinstall both the I/P compartment and the right I/P insulator and right carpet.

OEM 2004 Buick Regal Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Antenna Cables found

View related parts
2004 Buick Regal Antenna Cable
Part Number: 10428789
Product Specifications
- Other Name: Cable Assembly-Radio Antenna; Cable; Cable, Radio Antenna
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.4 x 6.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10428789
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS
View related parts
2004 Buick Regal Harness
Part Number: 88986483
Product Specifications
- Other Name: Cable; Cable, Vehicle Navigation/Information
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.7 x 13.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88986483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS
View related parts
2004 Buick Regal Cable Extension
Part Number: 12162743
Product Specifications
- Other Name: Cable Assembly, Radio Antenna; Antenna Cable; Extension; Cable; Cable, Radio Antenna
- Replaces: 12186607
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.3 x 8.3 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12162743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2004 Buick Regal Antenna Cable
Part Number: 10277524
Product Specifications
- Other Name: Cable Assembly-Radio Antenna; Base; Cable
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.2 x 3.1 x 3.1 inches
- Condition: New
- SKU: 10277524
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2004 Buick Regal Antenna Cable

With a comprehensive array of OEM 2004 Buick Regal Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Regal Antenna Cable Parts Questions & Experts Answers

Q: How to Replace an Antenna Cable for Extension Cable on 2004 Buick Regal?
A: Begin antenna cable replacement by taking out the right instrument panel (I/P) insulator then carefully moving the right carpet side to reach the wiring harness. First disconnect the I/P antenna cable from its connection to the body harness antenna cable afterward remove the I/P compartment and the radio. The routing path of the replacement I/P antenna cable requires termination of cable visibility at both the radio end and front door hinge pillar exit point from the I/P wiring harness. The new antenna cable needs to be attached to the harness at least every 150 mm (6 in) distance to properly protect and guide the cable using electrical tape installation along the wiring harness exterior. After connecting the I/P antenna cable to the radio you should relocate the radio. After hooking the I/P antenna cable to the body harness antenna cable located at the front door hinge pillar you should reinstall both the I/P compartment and the right I/P insulator and right carpet.