How to replace the Flywheel on 2004 Cadillac XLR?

You need to begin flexplate replacement procedures by detaching the driveline support assembly and its separation from the transmission. Beginning by removing the bolts securing the flexplate to the flexplate spindle will allow the removal of the flexplate. Mount the flexplate onto the flexplate spindle by placing the converter side mark toward the transmission Torque Converter. Fasten the flexplate to flexplate spindle bolts while tightening them to 50 nm (37 ft. Lbs.). End the installation process by reattaching the driveline support assembly both to the transmission and the vehicle itself.

OEM 2004 Cadillac XLR Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Flywheel found

View related parts
2004 Cadillac XLR Drive Plate
Part Number: 12588467
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Item Weight: 7.70 Pounds
- Item Dimensions: 13.1 x 13.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12588467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac XLR Submodels:
- Base | 8 Cyl 4.6 L GAS

2004 Cadillac XLR Flywheel

With a comprehensive array of OEM 2004 Cadillac XLR Flywheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac XLR Flywheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Cadillac XLR Flywheel Parts Questions & Experts Answers

Q: How to replace the Flywheel on 2004 Cadillac XLR?
A: You need to begin flexplate replacement procedures by detaching the driveline support assembly and its separation from the transmission. Beginning by removing the bolts securing the flexplate to the flexplate spindle will allow the removal of the flexplate. Mount the flexplate onto the flexplate spindle by placing the converter side mark toward the transmission Torque Converter. Fasten the flexplate to flexplate spindle bolts while tightening them to 50 nm (37 ft. Lbs.). End the installation process by reattaching the driveline support assembly both to the transmission and the vehicle itself.