How to replace the Brake Calipers on 2004 Chevrolet Aveo?

Make sure to raise and support the vehicle first, mark the position of the front wheels, and then take off the wheels. Subsequently, unbolt and take off the washers that fasten the brake hose to the caliper, then separate the hose and cap off both ends to keep fluid in. Then, loosen and remove the bolts that secure the caliper to the Steering Knuckle and take the caliper off. To install, put the caliper assembly in place and fasten the mounting bolts up to 95 nm (70 ft. Lbs.). Attach the brake hose and use a wrench to tighten the inlet fitting-to-caliper bolt and washers until you reach 40 nm (30 ft. Lbs.). Put on the front wheels, position the car, top off the master cylinder with fresh brake fluid, and bleed the brake lines. Finally, keep pressing the Brake Pedal several times until the pads contact the rotor and make sure not to move the vehicle until you have a firm pedal to prevent bad braking.

OEM 2004 Chevrolet Aveo Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Calipers found

View related parts
2004 Chevrolet Aveo Caliper
Part Number: 96475174
$152.92 MSRP: $276.81
You Save: $123.89 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Replaces: 96534636
- Item Weight: 10.50 Pounds
- Item Dimensions: 9.3 x 8.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96475174
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Caliper
Part Number: 96475175
$145.20 MSRP: $272.71
You Save: $127.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Replaces: 96534639
- Item Weight: 10.40 Pounds
- Item Dimensions: 9.2 x 8.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96475175
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2004 Chevrolet Aveo Brake Calipers

With a comprehensive array of OEM 2004 Chevrolet Aveo Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Aveo Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Brake Calipers on 2004 Chevrolet Aveo?
A: Make sure to raise and support the vehicle first, mark the position of the front wheels, and then take off the wheels. Subsequently, unbolt and take off the washers that fasten the brake hose to the caliper, then separate the hose and cap off both ends to keep fluid in. Then, loosen and remove the bolts that secure the caliper to the Steering Knuckle and take the caliper off. To install, put the caliper assembly in place and fasten the mounting bolts up to 95 nm (70 ft. Lbs.). Attach the brake hose and use a wrench to tighten the inlet fitting-to-caliper bolt and washers until you reach 40 nm (30 ft. Lbs.). Put on the front wheels, position the car, top off the master cylinder with fresh brake fluid, and bleed the brake lines. Finally, keep pressing the Brake Pedal several times until the pads contact the rotor and make sure not to move the vehicle until you have a firm pedal to prevent bad braking.