How to replace the drum brake backing plate on 2004 Chevrolet Aveo?

The first step towards replacing the drum Brake Backing Plate involves lifting the vehicle up and supporting it. Seize off the brake shoe elements, inclusive of the total park brake with the retainer, and after, pull off the nuts joining the wheel place mount to the back plate. Disconnect the Brake Line and plug the end of the section of the line to avoid loss of fluid or contamination, then remove the Wheel Cylinder assembly and the Wheel Hub assembly. In case it is equipped with an antilock brake system (ABS), unplug the cable that connects the gasket to the Wheel Speed Sensor, and remove the backing plate from the gasket. For installation, install the backingplate (new gasket) with the abshub correctly placed onto the Wheel Hub. Mount the entire Wheel Hub/backing assembly back into the rear axle plate, attach the nuts and reconnect the Wheel Speed Sensor if necessary and tightening the brake Wheel Hub/backing plate-to-rear axle to 28 nm (21 ft. Lbs). Then install the brake Wheel Cylinder assembly to the backing plate and then join the Brake Line tightening it to 16 nm (12 ft. Lbs.). Refit the brake parts and attach the parking brake with the retainer to the brake shoe lever. Finally, bleed brakes and lower the car.

OEM 2004 Chevrolet Aveo Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Backing Plates found

View related parts
2004 Chevrolet Aveo Backing Plate
Part Number: 96574701
$35.69 MSRP: $64.59
You Save: $28.90 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.1 x 12.2 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96574701
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Backing Plate
Part Number: 94565914
$6.90 MSRP: $12.96
You Save: $6.06 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; Splash Shield
- Position: Front
- Replaces: 96534661
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.9 x 5.4 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94565914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Backing Plate
Part Number: 94565915
$7.07 MSRP: $12.79
You Save: $5.72 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; Splash Shield
- Position: Front
- Replaces: 96534665
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.9 x 5.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94565915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Backing Plate
Part Number: 96574700
$35.89 MSRP: $67.40
You Save: $31.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.2 x 12.6 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96574700
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Backing Plate
Part Number: 96574702
$34.85 MSRP: $65.42
You Save: $30.57 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.1 x 12.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96574702
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2004 Chevrolet Aveo Backing Plate
Part Number: 96574703
$36.17 MSRP: $67.93
You Save: $31.76 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.2 x 12.4 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96574703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2004 Chevrolet Aveo Brake Backing Plate

With a comprehensive array of OEM 2004 Chevrolet Aveo Brake Backing Plate, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Aveo Brake Backing Plate are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the drum brake backing plate on 2004 Chevrolet Aveo?
A: The first step towards replacing the drum Brake Backing Plate involves lifting the vehicle up and supporting it. Seize off the brake shoe elements, inclusive of the total park brake with the retainer, and after, pull off the nuts joining the wheel place mount to the back plate. Disconnect the Brake Line and plug the end of the section of the line to avoid loss of fluid or contamination, then remove the Wheel Cylinder assembly and the Wheel Hub assembly. In case it is equipped with an antilock brake system (ABS), unplug the cable that connects the gasket to the Wheel Speed Sensor, and remove the backing plate from the gasket. For installation, install the backingplate (new gasket) with the abshub correctly placed onto the Wheel Hub. Mount the entire Wheel Hub/backing assembly back into the rear axle plate, attach the nuts and reconnect the Wheel Speed Sensor if necessary and tightening the brake Wheel Hub/backing plate-to-rear axle to 28 nm (21 ft. Lbs). Then install the brake Wheel Cylinder assembly to the backing plate and then join the Brake Line tightening it to 16 nm (12 ft. Lbs.). Refit the brake parts and attach the parking brake with the retainer to the brake shoe lever. Finally, bleed brakes and lower the car.