How to replace the drum brake backing plate on Chevrolet Aveo?

The process of replacing a drum Brake Backing Plate starts with raising the vehicle to maintain suitable support. Cleanly remove all brake shoe elements while eliminating the entire parking brake system and its retainer. Starting with the nuts that anchor the Wheel Hub assembly to the backing plate, remove them before extracting the Brake Line and installing a plug to stop fluid leakage or contamination. After removing the Wheel Cylinder assembly the Wheel Hub assembly should be extracted. You must disconnect the cable that provides power to the Wheel Speed Sensor together with the backing plate from its gasket when your vehicle comes equipped with abs. To install the assembly begin by placing the Wheel Hub together with a new gasket onto the backing plate before inserting the complete Wheel Hub/backing plate assembly into the rear axle plate. When your vehicle has abs brakes you must tighten the brake Wheel Hub/backing plate-to-rear axle nuts to 28 n.m (21 lb ft) after installing the nuts and reconnecting the Wheel Speed Sensor. Attach the brake Wheel Cylinder assembly to the backing plate while installing the Brake Line and tighten it to 16 n.m (12 lb ft). The brake components require reinstallation before installing the Parking Brake Cable retainer onto the brake shoe lever. Next proceed with brake bleeding and lower the entire vehicle to the ground.

OEM Chevrolet Aveo Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Backing Plates found

View related parts
Chevrolet Aveo Backing Plate
Part Number: 96574701
$35.69 MSRP: $64.59
You Save: $28.90 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Backing Plate
Part Number: 94565915
$7.07 MSRP: $12.79
You Save: $5.72 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; Splash Shield
- Position: Front
- Replaces: 96534665
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Backing Plate
Part Number: 94565914
$6.90 MSRP: $12.96
You Save: $6.06 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; Splash Shield
- Position: Front
- Replaces: 96534661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Backing Plate
Part Number: 96574700
$35.89 MSRP: $67.40
You Save: $31.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Backing Plate
Part Number: 96574702
$34.85 MSRP: $65.42
You Save: $30.57 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Backing Plate
Part Number: 96574703
$36.17 MSRP: $67.93
You Save: $31.76 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

Chevrolet Aveo Brake Backing Plate

Our website offers an extensive catalog of genuine Chevrolet Aveo Brake Backing Plate at unbeatable prices. Every OEM Chevrolet Aveo Brake Backing Plate comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Aveo Brake Backing Plate Parts Questions & Experts Answers

Backing Plate
96574700
Q: How to replace the drum brake backing plate on Chevrolet Aveo?
A: The process of replacing a drum Brake Backing Plate starts with raising the vehicle to maintain suitable support. Cleanly remove all brake shoe elements while eliminating the entire parking brake system and its retainer. Starting with the nuts that anchor the Wheel Hub assembly to the backing plate, remove them before extracting the Brake Line and installing a plug to stop fluid leakage or contamination. After removing the Wheel Cylinder assembly the Wheel Hub assembly should be extracted. You must disconnect the cable that provides power to the Wheel Speed Sensor together with the backing plate from its gasket when your vehicle comes equipped with abs. To install the assembly begin by placing the Wheel Hub together with a new gasket onto the backing plate before inserting the complete Wheel Hub/backing plate assembly into the rear axle plate. When your vehicle has abs brakes you must tighten the brake Wheel Hub/backing plate-to-rear axle nuts to 28 n.m (21 lb ft) after installing the nuts and reconnecting the Wheel Speed Sensor. Attach the brake Wheel Cylinder assembly to the backing plate while installing the Brake Line and tighten it to 16 n.m (12 lb ft). The brake components require reinstallation before installing the Parking Brake Cable retainer onto the brake shoe lever. Next proceed with brake bleeding and lower the entire vehicle to the ground.