Make sure this part fits

GM 94565914
Backing Plate

2004-2011 GM

Customer Questions & Expert Answers (8)
GM 94565914 Backing Plate
GM 94565914 Backing Plate
  • Part Description
    Shield, Brake Flange Plate; Brake Dust Shield
  • Position
    Front
  • Replaces
    96534661
  • Manufacturer
    General Motors
Make sure this part fits
$7.80 MSRP: $14.12
You Save: $6.32 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2011 Chevrolet AveoBase, LS, LT, Special Value4 Cyl 1.6 L GAS
    2007-2011 Chevrolet Aveo5LS, LT, Special Value4 Cyl 1.6 L GAS
    2009-2010 Pontiac G3Base4 Cyl 1.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 94565914 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 94565914 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front disc brake dust shields on Chevrolet Aveo? Posted by Customer
    A:
    To replace the front disc Brake Dust Shields, remove the rotor from the wheel first, after that remove the screws that hold the dust shields to the Steering Knuckle and remove the dust shields. For installation, install the new dust shields and then make sure that it fastens to the Steering Knuckle using the screws (4 Nm, 35 inch lbs.). Finally, reinstall the rotor.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the nuts for the 2004 Chevrolet Aveo? Posted by Customer
    A:
    Disconnect the brake line and plug the opening to prevent fluid loss or contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How should the wheel hub/backing plate assembly be installed for the 2007 Chevrolet Aveo? Posted by Customer
    A:
    Insert the complete wheel hub/backing plate assembly into the rear axle plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after placing the backing plate for the 2009 Chevrolet Aveo? Posted by Customer
    A:
    Insert the complete wheel hub/backing plate assembly into the rear axle plate, and if applicable, install the nuts and reconnect the wheel speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after tightening the nuts for the 2006 Chevrolet Aveo? Posted by Customer
    A:
    Install the brake wheel cylinder assembly onto the backing plate, then connect the brake line and tighten it to 16 Nm (12 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the torque specification for tightening the brake wheel hub/backing plate-to-rear axle nuts for the 2008 Chevrolet Aveo? Posted by Customer
    A:
    Tighten the nuts to 28 N.m (21 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the final step in the process for the 2010 Chevrolet Aveo? Posted by Customer
    A:
    Reinstall the brake components and attach the parking brake cable with the retainer to the brake shoe lever, then bleed the brakes and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Backing Plate 94565914 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 94565914 Backing Plate is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 94565914 Backing Plate fits certain Chevrolet Aveo, Aveo5 models, as well as Pontiac G3 models.
The original GM component designated by manufacturer part number 94565914 maintains top performance when functioning as the Shield, Brake Flange Plate; Brake Dust Shield unit at its Front. The component 94565914 is constructed from durable material and its dimensions span 8.9 x 5.4 x 0.4 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Splash Shield. The part 94565914 has available replacement options 96534661. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.