Before you start replacing the front Wheel Speed Sensor you need to disconnect the negative
Battery Cable. You need to unplug the electrical connector from the front Wheel Speed Sensor. For safety make sure your vehicle rests on two jack stands placed directly opposite the work area and get a strap to secure it to the hoist. Lift and correctly support the vehicle before taking out the wheel. You should take out all bolts and the front Wheel Speed Sensor from the
Steering Knuckle. Fasten the front Wheel Speed Sensor to the Steering Knuckle then bolt it with the screws while tightening them to 8 nm (71 lb in). Reinstall the wheel then slowly bring the vehicle down while connecting the front Wheel Speed Sensor electrical wires and reattaching the negative Battery Cable.