OEM 2004 Chevrolet Aveo Shift Cable

2004 Chevrolet Aveo Shift Cable Parts Questions & Experts Answers

• Q: How to replace the floor shift cable on 2004 Chevrolet Aveo?

  A: The process to change a floor shift control cable begins by disconnecting the negative Battery Cable followed by removing the floor console. Start by removing the shift control cable adjusting nut after which you should detach the cable from the shift control lever assembly. The shift control cable requires removal of its e-ring before disconnecting it from the park/neutral position (PNP) switch. The worker removes the e-ring from the shift control cable bracket before disconnecting the cable and disconnecting it from the shift control cable fastener. Take out the shift control cable as the last step in this procedure. The first step of installation requires reinserting the shift control cable into the vehicle while connecting it to the shift control cable fastener. The technician installs the e-ring to the shift control cable bracket followed by connecting the cable before connecting it to the pnp switch and installing the shift control cable retaining e-ring. The shift control lever assembly requires both a shift control cable connection and an installation of the cable adjusting nut which should be tightened to 8 nm (71 inch lbs.). The process ends with both trim panel installation onto the floor console and the negative Battery Cable reconnection.