OEM 2005 Chevrolet Aveo Shift Cable

2005 Chevrolet Aveo Shift Cable Parts Questions & Experts Answers

• Q: How to replace the shift cable on 2005 Chevrolet Aveo?

  A: The first step to replace the shift control cable requires removal of the Air Hose and the air cleaner to Throttle Body then the battery but handling Batteries entails caution due to explosive gases present. The first step removes transaxle side select and shift control cable pins together with washers while you disconnect the select and shift control cable before removing the cable e-rings. Start by removing the floor console then unplug the cable strands from the cable bracket. The installation of the gear shift control cable begins by moving the floor carpet then removing the gear shift lever side select and shift control cable u-clip and the eye ring followed by the select control cable e-ring to finally disconnect the select control cable. Start by removing the shift control cable pin and cable e-ring before extracting the shift control cable and select and shift control cable nuts through the passenger room. The cables should be routed toward the engine compartment by going through the dash panel while they align correctly to the select and shift lever. Connect the cables between the transaxle side select and the shift control functions to the gear shift lever side select control function. Install the cable eye ring of the gear shift select control to the select arm pin and then secure the gear shift selector lever control cable clip. Secure the gear shift select control cable on the gear shift lever bracket by adding an e-ring until the select arm adjustment hole stabilizes the neutral position through screwdriver use. After connecting the gear shift lever side select control cable the installer should reposition the floor console before tightening the gear cable adjust nut to 8 - 12 nm (71 - 106 inch lbs.). Install the battery and the Air Hose as the last step.