OEM 2006 Chevrolet Aveo Shift Cable

2006 Chevrolet Aveo Shift Cable Parts Questions & Experts Answers

• Q: How to replace the floor shift cable on 2006 Chevrolet Aveo?

  A: Starting the replacement process of a floor shift control cable requires users to disconnect the negative Battery Cable before removing the floor console. Unfasten the cable adjusting nut then detach the shift control cable from its point of connection to the shift control lever assembly. First disconnect the cable from the park/neutral position (PNP) switch by removing the shift control cable retaining e-ring. Remove the shift control cable first by taking off its e-ring from the bracket. Then disconnect it from the fastener before retrieving it from the vehicle. Begin new shift control cable installation by placing cable onto the vehicle then linking it to shift control cable fastener. To complete the operation you should install the e-ring to the shift control cable bracket before connecting the cable to the pnp switch. The second step involves putting on the shift control cable retaining e-ring while the cable connects to the shift control lever assembly. First install the cable adjusting nut before tightening it to 8 nm (71 inches lbs.). Afterward, return the floor console trim panel to its place then connect the negative Battery Cable.