OEM 2007 Chevrolet Aveo Shift Cable

Transmission Shift Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Cable found

  • 2007 Chevy Aveo Shift Cable - 96423177
    2007 Chevy Aveo Shift Cable Diagram - 96423177
    View related parts
    Product Specifications
    • Other Name: Cable Assembly, Automatic Transmission Range Selector Lever; Cable, Transmission Shift Control Cable
    • Replaces: 96485156
    • Item Weight: 4.00 Pounds
    • Item Dimensions: 63.6 x 6.2 x 6.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 96423177
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Chevrolet Aveo Submodels:
    • Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2007 Chevrolet Aveo Shift Cable

With a comprehensive array of OEM 2007 Chevrolet Aveo Shift Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Aveo Shift Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Aveo Shift Cable Parts Questions & Experts Answers

  • Q: How to replace the shift cable on 2007 Chevrolet Aveo?
    A: The repair process for the shift control cable begins with Air Hose removal between the air cleaner and Throttle Body after observing battery-related gas safety warnings. Extract first the transaxle side select and shift control cable pins and washers from the battery along with the pin. Turn off the select and shift control cable functions before uninstalling the cable e-rings. The cables must be disconnected from the cable bracket followed by removal of the floor console. Drop the floor carpet to reach the gear Shift Cable before prying off the gear shift lever u-clip along with the side select and shift control cable then separate the eye ring and e-ring from the select control cable. First remove the shift control cable pin while disconnecting the select control cable before taking out both the shift control cable pin and its e-ring. Pull the cables into the passenger compartment after removing all select and shift control cable nuts. The installation process requires cable routing through the dash panel toward the engine compartment before adding them to the select and shift lever. Attention turns to joining both select and shift control cables on the transaxle side and the side control cable on the gear shift lever. The gear shift select control cable eye ring needs to be inserted onto the select arm pin after which it requires installation of the gear shift selector lever control cable clip. Use an e-ring to fasten the gear shift select control cable onto the gear shift lever bracket as you prevent movement by using a screwdriver in the select arm adjustment hole to keep the gear shift lever in neutral position. The floor console must be installed after both side select control cables connect to the gear shift lever. Position the gear cable adjust nut before tightening it between 8-12 n.m (71-106 lb in), followed by connecting the battery along with the Air Hose.

Related 2007 Chevrolet Aveo Parts