OEM 2007 Chevrolet Aveo Clutch Master Cylinder

2007 Chevrolet Aveo Clutch Master Cylinder Parts Questions & Experts Answers

• Q: How to replace the Clutch Master Cylinder on 2007 Chevrolet Aveo?

  A: To remove Clutch Master Cylinder, before taking off the hose of the reservoir tank, you should drain the clutch/brake corresponding fluid. Start with the removal of the locking clip, then remove the push rod fixing pin and rod. Next, undo the hose clamp from the master cylinder and the master cylinder hose, then the master cylinder pipe and Clutch Master Cylinder nuts, and finally, remove the Clutch Master Cylinder. For installation, begin with installing the Clutch Master Cylinder, then install and tighten the Clutch Master Cylinder nuts to 22 n.m (16 lb ft). Then, put the master cylinder pipe in place, attach the master cylinder hose, and fasten it with the hose clamp. Reinstall the push rod fixing pin and push rod and section the locking clip. Then bleed the air from the system and tweak the position of the clutch pedal if required. Be sure to finally fill the reservoir with clutch/brake fluid to the max level.