How to replace the left rear parking brake cable (without RPO NYS) on 2004 Chevrolet Blazer?

The first step to switch out the left rear park brake cable (without RPO NYS) requires the user to release the park brake while supporting the vehicle with elevators. You must lower the pressure on the park brake cable through front cable manipulation before removing it from the equalizer bar. The mounting bracket locking tabs need to be depressed to remove the cable before removing the bolt connecting it to the shock absorber bracket. After that remove the cable from the lever (25 series) by pressing its locking tabs and eliminate it from the backing plate. The procedure needs to be repeated for both the 15 series lever cable and backing plate cable before taking out the bindings again. To install the cable you should first guide it smoothly through its designated guides and body mount channels before inserting it at the backing plate (15 series) where it will lock into place when you press until the tabs click. Pair the cable with the lever after performing correct routing and apply the connection to both the lever and the backing plate (25 series). When attaching the cable to the shock absorber bracket secure it with a bolt that reaches 25 Nm (18 ft. lbs. torque). Trim the cable onto the mounting bracket by letting the locking tabs snap into place before you connect it to the equalizer bar and pull down the vehicle after safety stand removal and finish by adjusting the park brake cable.

OEM 2004 Chevrolet Blazer Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Parking Brake Cables found

View related parts
2004 Chevrolet Blazer Rear Cable Part Number: 15769540
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.2 x 11.7 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15769540
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet Blazer Rear Cable Part Number: 15769538
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.1 x 11.4 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15769538
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet Blazer Rear Cable Part Number: 15769541
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 3.2 x 14.6 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15769541
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet Blazer Rear Cable Part Number: 15769539
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 2.20 Pounds
- Item Dimensions: 13.6 x 13.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15769539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet Blazer Rear Cable Part Number: 15724600
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 13.8 x 13.7 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15724600
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet Blazer Front Cable Part Number: 15174789
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.2 x 13.6 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15174789
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, ZR2 | 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet Blazer Rear Cable Part Number: 15052597
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 15724595
- Item Weight: 1.80 Pounds
- Item Dimensions: 14.2 x 13.8 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15052597
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, ZR2 | 6 Cyl 4.3 L GAS

2004 Chevrolet Blazer Parking Brake Cable

With a comprehensive array of OEM 2004 Chevrolet Blazer Parking Brake Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Blazer Parking Brake Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Blazer Parking Brake Cable Parts and Q&A

Q: How to replace the left rear parking brake cable (without RPO NYS) on 2004 Chevrolet Blazer?
A: The first step to switch out the left rear park brake cable (without RPO NYS) requires the user to release the park brake while supporting the vehicle with elevators. You must lower the pressure on the park brake cable through front cable manipulation before removing it from the equalizer bar. The mounting bracket locking tabs need to be depressed to remove the cable before removing the bolt connecting it to the shock absorber bracket. After that remove the cable from the lever (25 series) by pressing its locking tabs and eliminate it from the backing plate. The procedure needs to be repeated for both the 15 series lever cable and backing plate cable before taking out the bindings again. To install the cable you should first guide it smoothly through its designated guides and body mount channels before inserting it at the backing plate (15 series) where it will lock into place when you press until the tabs click. Pair the cable with the lever after performing correct routing and apply the connection to both the lever and the backing plate (25 series). When attaching the cable to the shock absorber bracket secure it with a bolt that reaches 25 Nm (18 ft. lbs. torque). Trim the cable onto the mounting bracket by letting the locking tabs snap into place before you connect it to the equalizer bar and pull down the vehicle after safety stand removal and finish by adjusting the park brake cable.