OEM 2004 Chevrolet Colorado Transfer Case Seal

2004 Chevrolet Colorado Parts Questions & Experts Answers

• Q: How to replace the input transfer case seal on 2004 Chevrolet Colorado?

  A: The replacement process of the Transfer Case input shaft seal begins by removing the Transfer Case assembly. Place the assembly fixture (J 45759) onto the Transfer Case through four suitable bolts before mounting the holding fixture (J 3289-20) into a strong workbench. The Transfer Case fits into the holding fixture (J 3289-20) with j 45759 assembly fixture when secured by a pivot pin. Apply the seal remover (J 45278) to the seal while holding it below the transferring while you remove it. The input shaft seal removal from the Transfer Case requires the slide hammer with bearing adapter (J 23907) alongside the seal remover (J 45278) according to the instructions. After removal discard both the seal and the equipment. The proper depth of the new input shaft seal should be maintained using the input seal installer (J 45934) with a hammer during Transfer Case installation. The assembly fixture (J 45759) should be detached from the Transfer Case before reinstalling the entire Transfer Case assembly.