Other Name: Bulb, Headlamp (High Beam); Headlight Bulbs; Car Bulbs; Headlight; Headlamp Bulb; High Beam; Composite Assembly; Fog Lamp/Turn Signal; Capsule Bulb
Item Weight: 0.40 Pounds
Item Dimensions: 4.2 x 2.2 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 9441732
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
2004 Chevrolet Corvette Headlight Bulb
With a comprehensive array of OEM 2004 Chevrolet Corvette Headlight Bulb, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Corvette Headlight Bulb are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Chevrolet Corvette Headlight Bulb Parts Questions & Experts Answers
Q: How to replace the front headlight bulb on 2004 Chevrolet Corvette?
A: Start by opening your hood then unfasten the headlamp motor/actuator cover from the knob to proceed with replacing the bulb. Tilt the manual control knob of the headlamp motor/actuator in a counterclockwise direction to lift the headlamp before removing the electrical connector between the wiring harnesses of the forward lamp wiring harness and the headlamp wiring harness. Push the middle bezel off the headlamp unit before you insert your hand between the headlamp and frame rail to access the bulb and socket. People should exercise caution when handling halogen bulbs. Counterclockwise rotation of the headlamp bulb/socket will separate it from the headlamp capsule. After extracting the bulb/socket disconnect its electrical connector. Complete the parameter through a clockwise rotation that will securely position the headlamp capsule. First reinstall the headlamp bezel then use the headlamp motor/actuator manual control knob to rotate clockwise for lowering the lamp before connecting the wiring harness electrical connector to the forward lamp wiring harness. To finish the installation install the headlamp motor/actuator knob cover before checking and adjusting the headlamp aim if needed then close the hood.