OEM 2004 Chevrolet Corvette Light Control Module

2004 Chevrolet Corvette Parts Questions & Experts Answers

• Q: How to replace the Front Light Control Module on 2004 Chevrolet Corvette?

  A: The replacement process for the headlamp control module starts with accessing the instrument panel electrical center through removal of the passenger kick-up panel cover. Next remove the headlamp circuit breaker from this center. Move the hood open while raising the rh headlamp manually and rotate the headlamp motor/actuator manual control knob to the counterclockwise direction for enhanced lifting. You should disconnect the rh headlamp wiring harness electrical connector from the forward lamp wiring harness followed by raising your vehicle to achieve better access. After removing the front fascia lower closeout panel you must release the brake caliper cooling duct and relocate it. To remove the headlamp control module from the vehicle you must disconnect the electrical connectors followed by unfastening the module mounting nuts located at the bracket. After that you can extract the module. Secure the new headlamp control module on the headlamp bracket by using the nuts (Nuts). Reconnect all electrical connectors to the module while you reposition the brake caliper cooling duct before pushing it in place to fasten it. Lower the vehicle together with the front fascia lower closeout panel while linking the rh headlamp wiring harness electrical connector to the forward lamp wiring harness. To complete the procedure users should first manually position the rh headlamp into the correct level by rotating the headlamp motor/actuator manual control knob clockwise. Next users must return the headlamp circuit breaker into the ip electrical center before sealing it with the floor kick up panel and then closing the hood.