How to Replace a Brake Light Switch and Ensure Proper Installation on 2004 Chevrolet Malibu?

First disconnect the steering wheel and the closeout panel to reach the brake pedal position sensor. To change the brake pedal position sensor slide off its electrical connector then loosen the bolt to remove the sensor from the vehicle. Replace the new sensor strictly with the proper fastener at its designated spot since replacement fasteners must match their original part details. Do not put paints, lubricants, or corrosion protectants on fastener or joining areas because they alter torque performance and clamping strength. Use one unused bolt for position sensor hookup while tightening it to 2 Nm (18 lb in). Set the position sensor electrical wire back in position and position the steering wheel's terminal support into the steering column before placing the panel's cover back. Finally, calibrate the position sensor.

OEM 2004 Chevrolet Malibu Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Light Switches found

View related parts
2004 Chevrolet Malibu Stoplamp Switch, Green Line
Part Number: 22666955
$14.37 MSRP: $25.66
You Save: $11.29 (44%)
Product Specifications
- Other Name: Sensor Kit, Brake Pedal Position; Brake Light Switch; Switch; Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.5 x 1.8 x 1.4 inches
- Condition: New
- SKU: 22666955
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2004 Chevrolet Malibu Adjust Switch
Part Number: 22724198
Product Specifications
- Other Name: Switch Assembly-Electronic Brake Control Brake Pedal; Switch; Switch, Electronic Brake Control
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22724198
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2004 Chevrolet Malibu Brake Light Switch

With a comprehensive array of OEM 2004 Chevrolet Malibu Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Malibu Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to Replace a Brake Light Switch and Ensure Proper Installation on 2004 Chevrolet Malibu?
A: First disconnect the steering wheel and the closeout panel to reach the brake pedal position sensor. To change the brake pedal position sensor slide off its electrical connector then loosen the bolt to remove the sensor from the vehicle. Replace the new sensor strictly with the proper fastener at its designated spot since replacement fasteners must match their original part details. Do not put paints, lubricants, or corrosion protectants on fastener or joining areas because they alter torque performance and clamping strength. Use one unused bolt for position sensor hookup while tightening it to 2 Nm (18 lb in). Set the position sensor electrical wire back in position and position the steering wheel's terminal support into the steering column before placing the panel's cover back. Finally, calibrate the position sensor.