How to replace the cruise control module on 2004 Chevrolet S10?

In order to substitute the cruise control module, one has to first disconnect the battery negative cable, the cruise control cable, and the electrical connector. Unscrew the nuts which clamp the module, then the screws which keep the mounting bracket. Re-attach the bracket and module, re-connect the cables and the system should be tested to confirm its functionality.

OEM 2004 Chevrolet S10 Cruise Control Module

Cruise Control Module Speed Control

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Module found

View related parts
2004 Chevrolet S10 Control Module Part Number: 15759192
Product Specifications
- Other Name: Module, Cruise Control; Cruise Control Module; Module
- Item Weight: 2.80 Pounds
- Item Dimensions: 3.9 x 4.5 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15759192
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet S10 Submodels:
- Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2004 Chevrolet S10 Cruise Control Module

With a comprehensive array of OEM 2004 Chevrolet S10 Cruise Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet S10 Cruise Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet S10 Cruise Control Module Parts and Q&A

Q: How to replace the cruise control module on 2004 Chevrolet S10?
A: In order to substitute the cruise control module, one has to first disconnect the battery negative cable, the cruise control cable, and the electrical connector. Unscrew the nuts which clamp the module, then the screws which keep the mounting bracket. Re-attach the bracket and module, re-connect the cables and the system should be tested to confirm its functionality.