OEM Chevrolet S10 Cruise Control Module

Chevrolet S10 Cruise Control Module Parts and Q&A

• Control Module
  25315088
  Q: How to service the Cruise Control Module on Chevrolet S10?

  A:

  In order to service the Cruise Control Module, before starting, disconnect the battery negative cable and afterwards disconnect cruise control cable and the electrical connector. The 3 nuts that have to be removed in order to separate the Cruise Control Module from the mounting bracket studs should now be removed, followed by the leaving behind of the module. Next, remove the 3 screws that cause the bracket to mount to the cowl panel. To install, mount the mounting bracket to the cowl panel, by using the 3 screws and tightening the screws. Then, reinstall the Cruise Control Module in the vehicle and fasten with the 3 nuts, tighten 9.0 n.m, (6.6 lb ft). Reconnect the electrical connector and the cruise control cable and finally reconnecting battery negative cable. Finally, verify the system's operation to ensure all the components are working fine.
• Control Module
  15759192
  Q: How to replace the cruise control module on Chevrolet S10?

  A:

  First disconnect the negative Battery Cable while following the cautionary instructions. The next step requires disconnection of both cruise control cable and electrical connector. To remove the Cruise Control Module from its bracket positions you need to remove three mounting nuts that anchor the module to bracket studs. Move forward by unscrewing the three fasteners which anchor the mounting bracket to the cowl panel. The mounting bracket requires attaching to the cowl panel using three appropriate screws. Screw the Cruise Control Module into its proper vehicle position and tighten all 3 nuts to a torque of 9.0 n.m (6.6 lb ft). Iplina an electrical connection and cruise control wire and connect the battery negative terminal. Test the system's functionality to verify proper working order.