How to Replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 on 2004 Chevrolet S10?

To replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2, first, lift the vehicle. Remove the connector of the HO2S and take off the HO2S with the use of Oxygen Sensor Wrench (J 39194-B). Before installing the new or service replacement sensor, make sure that the threads of the latter are covered with the anti-seize compound GM P/N 5613695 if deemed necessary since this compound is composed of liquid graphite and glass beads, making it easier to remove in the future. Fit the HO2S using the Oxygen Sensor Wrench (J 39194-B) and tighten it to 42 N.m (31 lb ft). Lastly join the HO2S harness connector and drop the vehicle.

OEM 2004 Chevrolet S10 Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oxygen Sensor found

View related parts
2004 Chevrolet S10 Oxygen Sensor Part Number: 12567254
$55.86 MSRP: $113.46
You Save: $57.60 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.3 x 3.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567254
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet S10 Submodels:
- Base, LS, Xtreme, ZR2, ZR5 | 6 Cyl 4.3 L GAS

2004 Chevrolet S10 Oxygen Sensor

With a comprehensive array of OEM 2004 Chevrolet S10 Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet S10 Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet S10 Oxygen Sensor Parts and Q&A

Q: How to Replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 on 2004 Chevrolet S10?
A: To replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2, first, lift the vehicle. Remove the connector of the HO2S and take off the HO2S with the use of Oxygen Sensor Wrench (J 39194-B). Before installing the new or service replacement sensor, make sure that the threads of the latter are covered with the anti-seize compound GM P/N 5613695 if deemed necessary since this compound is composed of liquid graphite and glass beads, making it easier to remove in the future. Fit the HO2S using the Oxygen Sensor Wrench (J 39194-B) and tighten it to 42 N.m (31 lb ft). Lastly join the HO2S harness connector and drop the vehicle.