Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-1998 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
Chevrolet S10 Oxygen Sensor
Want to cut long-term maintenance and repair costs? Choose OEM Oxygen Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Oxygen Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Oxygen Sensor is one of those components in Chevrolet S10 vehicles that are responsible for regulation of oxygen concentration in exhaust gases in order to adjust the setting of the air and fuel mixture and reduce emission levels. It produces a voltage signal proportional to the oxygen concentration; the signal is used by the engine control computer to increase or decrease the fuel injector pulse width. This feedback mechanism makes the engine function in a 'closed loop' to improve catalytic converter effectiveness. Some Chevrolet S10 models employ zirconium dioxide oxygen sensors, maybe both the upstream and the downstream sensors. The upstream oxygen sensor gives the information that allows the computers to change the air-fuel mixture while the downstream oxygen sensor checks on the catalytic converter. Some of the newer models may include wideband air fuel ratio sensors, this will be different from the more conventional and restricted band sensors. But all types of fuel injectors are subjected to contamination and degradation over time which in turn results to more emissions and poor fuel economy.
Chevrolet S10 Oxygen Sensor Parts Questions & Experts Answers
Q: How to replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 on Chevrolet S10?
A:
The first step to replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 involves vehicle elevation. First disconnect the connector for the HO2S before removing the HO2S with the Oxygen Sensor Wrench (J 39194-B). Prior to sensor installation you should apply GM P/N 5613695 anti-seize compound to threads if needed because this compound made from liquid graphite and glass beads will help with future sensor removal procedures. Use the Oxygen Sensor Wrench (J 39194-B) to install the HO2S then fasten it to a torque of 42 N.m (31 lb ft). Use the oxygen sensor wrench to connect the HO2S harness connector then lower the vehicle.