How to service and repair the Camshaft Position Sensor on Chevrolet S10?

Camshaft Position Sensor repair requires removal of Spark Plug Wires and ignition coil wire from the Distributor followed by unharnessing the camshaft position (CMP) sensor connector from the Distributor. The first step requires removal of the Distributor Cap screws and Distributor Cap along with rotor screws and rotor. Glide the square slot of the reluctor wheel into place with the cmp sensor before you unscrew the cmp sensor and its mounting screws. During installation keep out the previous cap and rotor screws and cmp sensor along with their screws. Replace Distributor screws with ones that have thread locking compound applied to them. After slotting the cmp sensor into the reluctor wheel position install new cmp mounting screws that require a torque setting of 2.2 n.m (19 lb in). Install the rotor onto the reluctor wheel before adding new rotor screws and torque them to 2 n.m (18 lb in). Put the Distributor Cap in its place and fasten it with new Distributor Cap screws at a torque of 2.4 n.m which equals 21 lb in. The final step involves connecting the cmp sensor harness connector and putting back the Spark Plug Wires and ignition coil wire.

OEM Chevrolet S10 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
Chevrolet S10 Camshaft Position Sensor Part Number: 19417445
$66.52 MSRP: $124.92
You Save: $58.40 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Camshaft Position Sensor Part Number: 10456617
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 10456250
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2003 Chevrolet S10 | Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS

Chevrolet S10 Camshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Camshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Camshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Camshaft Position Sensor in Chevrolet S10 is an important unit that regulates the speed and position of the camshaft by feeding the ECM with the position and speed data hence controlling the fuel injectors and ignition time. Usually it is installed above the camshaft; however, depending on the model of a car, it might be located in a different place. That function together with the Crank Sensor; the Camshaft Position Sensor assists in the right synchronization of the engine parts especially the fuel injection timing and the measurement of the engine speed. A Camshaft Position Sensor that has a problem will cause a vehicle's engine to perform poorly; therefore, it's critical to schedule its check-up and replacement when necessary.

Chevrolet S10 Camshaft Position Sensor Parts Questions & Experts Answers

Camshaft Position Sensor
19417445
Q: How to service and repair the Camshaft Position Sensor on Chevrolet S10?
A:
Camshaft Position Sensor repair requires removal of Spark Plug Wires and ignition coil wire from the Distributor followed by unharnessing the camshaft position (CMP) sensor connector from the Distributor. The first step requires removal of the Distributor Cap screws and Distributor Cap along with rotor screws and rotor. Glide the square slot of the reluctor wheel into place with the cmp sensor before you unscrew the cmp sensor and its mounting screws. During installation keep out the previous cap and rotor screws and cmp sensor along with their screws. Replace Distributor screws with ones that have thread locking compound applied to them. After slotting the cmp sensor into the reluctor wheel position install new cmp mounting screws that require a torque setting of 2.2 n.m (19 lb in). Install the rotor onto the reluctor wheel before adding new rotor screws and torque them to 2 n.m (18 lb in). Put the Distributor Cap in its place and fasten it with new Distributor Cap screws at a torque of 2.4 n.m which equals 21 lb in. The final step involves connecting the cmp sensor harness connector and putting back the Spark Plug Wires and ignition coil wire.