How to replace the steering knuckle on a 4WD on 2004 Chevrolet S10?

Raise and support vehicle. Unscrew take off wheel, hub/bearing, cotter pin, and tie-rod nut and part tie-rod using puller. Take away knuckle, separate sensor, loosen upper and lower ball joint, bracket of brake-hose. Install seal and new knuckle, attach ball-joint nut to 108 Nm, 83 Nm, torque tie-rod 53 Nm, install cotter pins, reconnect hub/bearing, check clearance.

OEM 2004 Chevrolet S10 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2004 Chevrolet S10 Knuckle, Driver Side Part Number: 15294229
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15704493, 18060557
- Item Weight: 11.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- SKU: 15294229
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet S10 Knuckle, Passenger Side Part Number: 18060558
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaced by: 15294230
- Item Weight: 12.30 Pounds
- Item Dimensions: 5.8 x 13.0 x 12.5 inches
- Condition: New
- SKU: 18060558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2004 Chevrolet S10 Steering Knuckle

With a comprehensive array of OEM 2004 Chevrolet S10 Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet S10 Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet S10 Steering Knuckle Parts and Q&A

Q: How to replace the steering knuckle on a 4WD on 2004 Chevrolet S10?
A: Raise and support vehicle. Unscrew take off wheel, hub/bearing, cotter pin, and tie-rod nut and part tie-rod using puller. Take away knuckle, separate sensor, loosen upper and lower ball joint, bracket of brake-hose. Install seal and new knuckle, attach ball-joint nut to 108 Nm, 83 Nm, torque tie-rod 53 Nm, install cotter pins, reconnect hub/bearing, check clearance.