How to replace the canister purge valves on 2004 Chevrolet Silverado 3500?

The electrical connector, EVAP line, and engine sight shield have to be disconnected in order to take out the EVAP canister purge solenoid valve. Take out the solenoid and insulator. To install, insert the insulator to the solenoid, screw up the bolt, reconnect the electrical connector, and reconnect the EVAP line and reconnect the shield.

OEM 2004 Chevrolet Silverado 3500 Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valves found

View related parts
2004 Chevrolet Silverado 3500 Purge Valve Part Number: 1997279
$40.09 MSRP: $74.80
You Save: $34.71 (47%)
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Vapor Canister Purge and Vent Solenoid.; Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997279
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

2004 Chevrolet Silverado 3500 Canister Purge Valves

With a comprehensive array of OEM 2004 Chevrolet Silverado 3500 Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Silverado 3500 Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Silverado 3500 Canister Purge Valves Parts Questions & Experts Answers

Q: How to replace the canister purge valves on 2004 Chevrolet Silverado 3500?
A: The electrical connector, EVAP line, and engine sight shield have to be disconnected in order to take out the EVAP canister purge solenoid valve. Take out the solenoid and insulator. To install, insert the insulator to the solenoid, screw up the bolt, reconnect the electrical connector, and reconnect the EVAP line and reconnect the shield.