OEM 2004 Chevrolet SSR Fuel Filler Hose

2004 Chevrolet SSR Fuel Filler Hose Parts Questions & Experts Answers

• Q: How to Replace a Fuel Filler Hose on 2004 Chevrolet SSR?

  A: The first step consists of cleaning the fuel pipe and hose connections together with the adjacent areas to stop fuel system contamination. The user must drain fuel until it reaches below the bottom point of the filler tube and hose assembly. The first step requires raising the vehicle and removing the Fuel Tank's hose clamp and then continuing with the fuel fill pipe's clamp detachment. First remove the fuel fill hose by taking out both clamp parts (11, 2) and then disconnect the hose clamp sections at the fill pipe (clamp and clamp ). Finally pull the hose assembly along with the clamps (8, 10) from the fill pipe. Cap the Fuel Tank opening. Begin by opening the Fuel Tank and then connect the fuel fill hose using clamps (8, 10) to the fuel fill pipe. Next, add the fuel fill hose together with clamps (2, 11) and apply torque to 2.5 n.m (22 lb in) as per the fastener notice in service precautions. Install the hose clamps (8 and 10) and tighten them to 22 lb in according to the fasteners mentioned in service precautions. Decrease the vehicle height while filling the fuel system.