How to replace the exhaust Camshaft Position Sensor on 2004 GMC Envoy?

The first step in sensor replacement requires you to disconnect the engine wiring harness electrical connector from the exhaust cmp sensor. Begin by detaching the bolt securing the exhaust cmp sensor and extract the sensor piece from the Cylinder Head while disposing of the o-ring seal. Install a new o-ring seal on the exhaust cmp sensor then apply a small amount of clean engine oil before returning the sensor to its Cylinder Head position. Tighten the bolt of the exhaust cmp sensor to a torque of 10 n.m (89 lb in) during installation. You must reconnect the engine wiring harness electrical connector to the exhaust cmp sensor .

OEM 2004 GMC Envoy Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2004 GMC Envoy Camshaft Position Sensor
Part Number: 12584079
$70.77 MSRP: $132.06
You Save: $61.29 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 12571266
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.5 x 6.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12584079
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Envoy Submodels:
- SLE, SLT | 6 Cyl 4.2 L GAS

2004 GMC Envoy Camshaft Position Sensor

With a comprehensive array of OEM 2004 GMC Envoy Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 GMC Envoy Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 GMC Envoy Parts Questions & Experts Answers

Q: How to replace the exhaust Camshaft Position Sensor on 2004 GMC Envoy?
A: The first step in sensor replacement requires you to disconnect the engine wiring harness electrical connector from the exhaust cmp sensor. Begin by detaching the bolt securing the exhaust cmp sensor and extract the sensor piece from the Cylinder Head while disposing of the o-ring seal. Install a new o-ring seal on the exhaust cmp sensor then apply a small amount of clean engine oil before returning the sensor to its Cylinder Head position. Tighten the bolt of the exhaust cmp sensor to a torque of 10 n.m (89 lb in) during installation. You must reconnect the engine wiring harness electrical connector to the exhaust cmp sensor .

Related 2004 GMC Envoy Parts

Alternate Year Models

2003 GMC Envoy Camshaft Position Sensor 2005 GMC Envoy Camshaft Position Sensor