How to replace the brake master cylinder on 2005 Buick Century?

First disconnect both electrical and brake pipes from the Brake Master Cylinder. Place a rubber brake fluid cover or cap over brake pipe ends to avoid fluid leakage and contamination. First disconnect the brake pipes from the master cylinder and take out the master cylinder from the vehicle by removing the mounting nuts while draining all brake fluid from the reservoir. Check if new master cylinders escape fluid properly before putting them into place with the Brake Booster. Place the master cylinder mounting nuts and tighten them to 25 nm torque setting. Thread and tighten the brake pipes to the master cylinder with 15 nm force when torque is 11 ft. Lbs. Complete the setup by attaching the brake fluid sensor electrical cord then perform brake system bleeding processes.

OEM 2005 Buick Century Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2005 Buick Century Master Cylinder
Part Number: 19209260
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18060780, 18026277
- Item Weight: 2.60 Pounds
- Item Dimensions: 9.7 x 7.4 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209260
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Master Cylinder
Part Number: 19209247
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18047667
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.6 x 9.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2005 Buick Century Brake Master Cylinder

With a comprehensive array of OEM 2005 Buick Century Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Century Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Century Brake Master Cylinder Parts Questions & Experts Answers

Q: How to replace the brake master cylinder on 2005 Buick Century?
A: First disconnect both electrical and brake pipes from the Brake Master Cylinder. Place a rubber brake fluid cover or cap over brake pipe ends to avoid fluid leakage and contamination. First disconnect the brake pipes from the master cylinder and take out the master cylinder from the vehicle by removing the mounting nuts while draining all brake fluid from the reservoir. Check if new master cylinders escape fluid properly before putting them into place with the Brake Booster. Place the master cylinder mounting nuts and tighten them to 25 nm torque setting. Thread and tighten the brake pipes to the master cylinder with 15 nm force when torque is 11 ft. Lbs. Complete the setup by attaching the brake fluid sensor electrical cord then perform brake system bleeding processes.