ChevyParts
My Garage
My Account
Cart
OEM 2005 Buick LaCrosse Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
Product Specifications- Other Name: Generator Assembly; Generator, Engine Electrical
- Replaces: 10366269, 15208916
- Item Weight: 14.50 Pounds
- Item Dimensions: 10.1 x 7.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20757890
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Generator Assembly; Generator, Engine Electrical
- Item Weight: 14.90 Pounds
- Item Dimensions: 6.8 x 8.1 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15208915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick LaCrosse Alternator
With a comprehensive array of OEM 2005 Buick LaCrosse Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LaCrosse Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Buick LaCrosse Parts Questions & Experts Answers
- Q: How to replace the alternator on 2005 Buick LaCrosse?A: Begin generator replacement by severing the battery ground (negative) cable from the battery. Accessible generator replacement requires engineers to remove torque struts and perform engine rotation. You must disassemble the generator b+ terminal nut and generator Battery Cable together with the generator electrical connector. The generator installation process begins by dissembling the Drive Belt and idler pulley and following with the removal of generator bolts to extract the generator from the vehicle. During installation position the generator within the vehicle before securing it with generator bolts tightened to 50 n.m (37 lb ft). After reinstalling the Drive Belt and idler pulley you should connect the generator electrical connector. Secure the Battery Cable and generator b+ terminal nut and torque it to 20 n.m (15 lb ft) tension. As the last step install the torque struts followed by reconnection of the battery negative ground cable to the battery.
