How to replace the shock absorber on 2005 Buick Terraza?

The process of replacing the strut assembly starts at the wiper module removal point. Boost the vehicle with a frame-contact vehicle lift but use this equipment for sole support then secure the lift properly. Lift the vehicle by using a frame-contact vehicle lift and remove the tire and wheel next. Let the vehicle drop to access the strut upper nuts that must be undone. Mark the strut to the knuckle with a pen prior to disconnecting the bolts and nuts from the strut lower mounting points to pull out the strut. Reposition the strut before lowering the vehicle into place. Install the strut upper nuts while tightening them to 41 Nm (30 ft. lbs.) then repeat the lifting procedure for struts lower bolts and nuts installation. Clean up the fasteners while removing surface rust so the fasteners can achieve 3 Nm (27 inch lbs.) of torque against each mating piece prior to assembly. otherwise, replace them. Tighten the strut lower nuts to 123 Nm (90 ft. lbs.) after achieving alignment with the knuckle mark. Put the tire back on along with the wheel then lower the vehicle before you put the wiper module back in place. Finally, inspect the alignment.

OEM 2005 Buick Terraza Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2005 Buick Terraza Shock Absorber, Rear
Part Number: 19169325
$186.60 MSRP: $362.16
You Save: $175.56 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Leveling Shock; Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 22064824, 22064712, 22064876, 22064818, 22064822, 22064847
- Item Weight: 10.40 Pounds
- Item Dimensions: 19.6 x 6.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19169325
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS
View related parts
2005 Buick Terraza Shock Absorber, Rear
Part Number: 15926213
$180.75 MSRP: $181.36
You Save: $0.61 (1%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 15216493, 15829670
- Item Weight: 5.90 Pounds
- Item Dimensions: 21.3 x 3.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15926213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2005 Buick Terraza Strut
Part Number: 88965456
$106.59 MSRP: $200.15
You Save: $93.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Suspension Strut and Shock Absorber Kit.; Strut, Front And Rear Suspension
- Position: Front
- Replaces: 88965457
- Item Weight: 7.10 Pounds
- Item Dimensions: 7.2 x 24.2 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88965456
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2005 Buick Terraza Shock Absorber, Rear
Part Number: 15219512
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Suspension Strut and Shock Kit; Complete Strut.; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 10367358, 10315979
- Item Weight: 5.40 Pounds
- Item Dimensions: 19.5 x 5.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15219512
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Buick Terraza Shock Absorber, Rear
Part Number: 15219511
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Suspension Strut and Shock Kit; Complete Strut.; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Item Weight: 5.10 Pounds
- Item Dimensions: 4.2 x 4.2 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15219511
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2005 Buick Terraza Shock Absorber
Part Number: 15943270
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 10413405, 10311197, 10288272, 10406050, 10310676, 10318617, 88963482, 10331459, 10401283, 10331458, 10406052, 10401282
- Item Weight: 4.10 Pounds
- Item Dimensions: 26.5 x 4.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15943270
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2005 Buick Terraza Shock Absorber

With a comprehensive array of OEM 2005 Buick Terraza Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Terraza Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Terraza Shock Absorber Parts Questions & Experts Answers

Q: How to replace the shock absorber on 2005 Buick Terraza?
A: The process of replacing the strut assembly starts at the wiper module removal point. Boost the vehicle with a frame-contact vehicle lift but use this equipment for sole support then secure the lift properly. Lift the vehicle by using a frame-contact vehicle lift and remove the tire and wheel next. Let the vehicle drop to access the strut upper nuts that must be undone. Mark the strut to the knuckle with a pen prior to disconnecting the bolts and nuts from the strut lower mounting points to pull out the strut. Reposition the strut before lowering the vehicle into place. Install the strut upper nuts while tightening them to 41 Nm (30 ft. lbs.) then repeat the lifting procedure for struts lower bolts and nuts installation. Clean up the fasteners while removing surface rust so the fasteners can achieve 3 Nm (27 inch lbs.) of torque against each mating piece prior to assembly. otherwise, replace them. Tighten the strut lower nuts to 123 Nm (90 ft. lbs.) after achieving alignment with the knuckle mark. Put the tire back on along with the wheel then lower the vehicle before you put the wiper module back in place. Finally, inspect the alignment.