OEM 2005 Cadillac SRX Coolant Reservoir

2005 Cadillac SRX Parts Questions & Experts Answers

• Q: How to replace the coolant reservoir on 2005 Cadillac SRX?

  A: Draining coolant begins steps for Coolant Reservoir replacement followed by electrical connector detachment from the master cylinder fluid level sensor with careful positioning to the side. Time to shift the hose clamp pliers (J 38185) on to disengage and move the Coolant Reservoir outlet hose clamp. Disconnect the Coolant Reservoir outlet hose afterwards. The pliers once again called hose clamp pliers j 38185 will help you disconnect and reposition the Coolant Reservoir inlet hose clamp before removing the Coolant Reservoir inlet hose. Start by removing the Coolant Reservoir bolt along with the nut but continue by disconnecting the low coolant sensor electrical connector before removing the Coolant Reservoir. After the installation of the Coolant Reservoir return it to its position and join the low coolant sensor's electrical connector. The Coolant Reservoir requires tightening its nut and bolt to 9 nm (80 inch lbs.). The hoses' inner diameters require clean coolant lubrication before Coolant Reservoir inlet hose attachment using hose clamp pliers (J 38185). Use hose clamp pliers (J 38185) to tighten each of the Coolant Reservoir outlet hose connections. Reconnect the master cylinder fluid level sensor electrical connector while performing a coolant addition to the system.