OEM 2006 Cadillac SRX Coolant Reservoir

2006 Cadillac SRX Parts Questions & Experts Answers

• Q: How to replace the coolant reservoir on 2006 Cadillac SRX?

  A: Begin Coolant Reservoir replacement by draining coolant and disconnecting master cylinder fluid level sensor electricity connection before moving it out of the way. Using hose clamp pliers (J38185) the garage technician will detach and relocate the Coolant Reservoir outlet hose clamp before disconnecting the outlet hose. Then using hose clamp pliers (J38185) reposition the Coolant Reservoir inlet hose clamp before removing this hose from the tank. The procedure begins by removing the Coolant Reservoir bolt and nut and disconnecting the low coolant sensor electrical connector for Coolant Reservoir removal. Put the Coolant Reservoir in place first then install its nut before tightening it to 9 nm (80 inch lbs.). Secure the Coolant Reservoir bolt at 9 nm torque strength (80 inch lbs.). Fitting the Coolant Reservoir inlet hose requires initial lubrication of its inside diameters with fresh coolant followed by application of hose clamp pliers (J38185) for final securement. Secure Coolant Reservoir outlet hose installation with hose clamp pliers (J38185) according to procedure. Reconnect the master cylinder fluid level sensor electrical connector after completing cooling system fluid installation.