How to replace the left exhaust manifold (LY7) on 2005 Cadillac SRX?

A proper replacement of the left Exhaust Manifold (LY7) requires removal of the Exhaust Manifold heat shield followed by the oil level indicator and Catalytic Converter nuts and Exhaust Manifold bolts. The gasket requires special attention because it cannot be reused therefore you must remove both the Exhaust Manifold and discard the Exhaust Manifold Gasket. A careful inspection and cleaning of the Exhaust Manifold should take place before carrying out assembly steps. Check the condition of the Catalytic Converter seal/heat shield sealing surface for wear or damage before installing both components to the converter. You must position an entirely new Exhaust Manifold Gasket onto the Exhaust Manifold before installing both parts onto the Catalytic Converter and Cylinder Head. The first installation step involves bolt installation of the Exhaust Manifold at 20 nm torque (15 ft. Lbs.), then Catalytic Converter nut installation at 50 nm torque (37 ft. Lbs.). The last step involves putting back the Exhaust Manifold heat shield and the oil level indicator.

OEM 2005 Cadillac SRX Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Manifolds found

View related parts
2005 Cadillac SRX Exhaust Manifold, Driver Side
Part Number: 12571102
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Item Weight: 8.00 Pounds
- Item Dimensions: 15.3 x 7.3 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12571102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2005 Cadillac SRX Exhaust Manifold, Driver Side
Part Number: 12638981
Product Specifications
- Other Name: Manifold, Catalytic Converter; Manifold; Manifold, Engine Exhaust Manifold
- Position: Driver Side
- Replaces: 12567687
- Item Weight: 20.90 Pounds
- Item Dimensions: 4.5 x 31.4 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12638981
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac SRX Exhaust Manifold, Passenger Side
Part Number: 12638982
Product Specifications
- Other Name: Manifold, Catalytic Converter; Manifold; Manifold, Engine Exhaust Manifold
- Position: Passenger Side
- Replaces: 12567688
- Item Weight: 20.50 Pounds
- Item Dimensions: 31.3 x 10.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12638982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac SRX Exhaust Manifold, Passenger Side
Part Number: 12571101
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Item Weight: 7.40 Pounds
- Item Dimensions: 15.0 x 7.5 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12571101
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS

2005 Cadillac SRX Exhaust Manifold

With a comprehensive array of OEM 2005 Cadillac SRX Exhaust Manifold, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac SRX Exhaust Manifold are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac SRX Exhaust Manifold Parts Questions & Experts Answers

Q: How to replace the left exhaust manifold (LY7) on 2005 Cadillac SRX?
A: A proper replacement of the left Exhaust Manifold (LY7) requires removal of the Exhaust Manifold heat shield followed by the oil level indicator and Catalytic Converter nuts and Exhaust Manifold bolts. The gasket requires special attention because it cannot be reused therefore you must remove both the Exhaust Manifold and discard the Exhaust Manifold Gasket. A careful inspection and cleaning of the Exhaust Manifold should take place before carrying out assembly steps. Check the condition of the Catalytic Converter seal/heat shield sealing surface for wear or damage before installing both components to the converter. You must position an entirely new Exhaust Manifold Gasket onto the Exhaust Manifold before installing both parts onto the Catalytic Converter and Cylinder Head. The first installation step involves bolt installation of the Exhaust Manifold at 20 nm torque (15 ft. Lbs.), then Catalytic Converter nut installation at 50 nm torque (37 ft. Lbs.). The last step involves putting back the Exhaust Manifold heat shield and the oil level indicator.