Make sure this part fits

GM 12571101
Exhaust Manifold, Passenger Side

2004-2011 GM

Customer Questions & Expert Answers (23)
GM 12571101 Exhaust Manifold, Passenger Side
  • Part Description
    Manifold, Engine Exhaust Manifold
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2011 Cadillac CTSBase, Luxury, Performance, Premium, V6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS
    2010-2011 Chevrolet CamaroLS, LT6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12571101 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12571101 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2004 Cadillac SRX? Posted by Customer
    A:
    Reinstall the exhaust manifold heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the first step to replace the right exhaust manifold for the 2004 Cadillac CTS? Posted by Customer
    A:
    Begin by removing the drive belt tensioner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the torque specification for the catalytic converter nuts for the 2005 Cadillac CTS? Posted by Customer
    A:
    Tighten them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the first step to replace the right side exhaust manifold for the 2008 Cadillac CTS? Posted by Customer
    A:
    First, remove the exhaust manifold heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the final step in the process for the 2009 Cadillac CTS? Posted by Customer
    A:
    Reinstall the exhaust manifold heat shield and inspect the exhaust system for leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after removing the exhaust manifold for the 2007 Cadillac CTS? Posted by Customer
    A:
    Discard the old gasket and clean and inspect the manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be checked when installing the catalytic converter seal/heat shield for the 2006 Cadillac CTS? Posted by Customer
    A:
    Check the sealing surface for wear or damage; replace if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after installing the left exhaust manifold nuts for the 2004 Cadillac CTS? Posted by Customer
    A:
    Reinstall the heated oxygen sensor if it was removed, followed by the left catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the final step in the process for the 2008 Cadillac SRX? Posted by Customer
    A:
    With assistance, reinstall the exhaust system, and finally, install the generator and its bolts (1-3).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    How should the exhaust manifold be positioned for the 2009 Cadillac SRX? Posted by Customer
    A:
    Position the exhaust manifold with the gasket to the catalytic converter and the cylinder head.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the torque specification for the exhaust manifold bolts for the 2005 Cadillac SRX? Posted by Customer
    A:
    Tighten the exhaust manifold bolts to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after removing the heat shield for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the left exhaust manifold bolts and nuts, discarding the bolts, and remove the exhaust manifold studs if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done before installation of the new manifold for the 2005 Cadillac STS? Posted by Customer
    A:
    Clean and inspect the left exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after attaching the exhaust manifold for the 2010 Cadillac STS? Posted by Customer
    A:
    Install the exhaust manifold bolts and tighten them to 20 Nm (15 lb ft), followed by the catalytic converter nuts, which should be tightened to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be inspected before installation for the 2009 Cadillac STS? Posted by Customer
    A:
    Inspect the catalytic converter seal/heat shield sealing surface and replace it if worn or damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    How is the exhaust system removed for the 2007 Cadillac SRX? Posted by Customer
    A:
    With assistance, remove the exhaust system from the insulators and the vehicle, followed by the right exhaust manifold heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done if the heated oxygen sensor needs to be removed for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the heated oxygen sensor, followed by the right exhaust manifold bolts and nuts, discarding the bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be inspected before installation for the 2007 Cadillac STS? Posted by Customer
    A:
    Inspect the catalytic converter seal/heat shield sealing surface and replace it if worn or damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the torque specification for the exhaust manifold bolts for the 2008 Cadillac STS? Posted by Customer
    A:
    Tighten the exhaust manifold bolts to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the next step after removing the coil assembly and spark plugs for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Raise and support the vehicle, then remove the left catalytic converter and seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be inspected before installation for the 2008 Cadillac STS? Posted by Customer
    A:
    Inspect the catalytic converter seal/heat shield sealing surface and replace it if worn or damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    Why is it important to ensure the exhaust manifold bolts are tightened as specified for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    To prevent issues with vehicle emissions and On-Board Diagnostics (OBD) II system performance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Exhaust Manifold, Passenger Side 12571101 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12571101 Exhaust Manifold, Passenger Side is available in the market under the name GM Exhaust Manifold. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12571101 Exhaust Manifold, Passenger Side fits certain Chevrolet Camaro models, as well as Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 12571101 maintains top performance when functioning as the Manifold, Engine Exhaust Manifold unit at its Passenger Side. The component 12571101 is constructed from durable material and its dimensions span 15.0 x 7.5 x 7.4 inches while weighing 7.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Manifold. The part 12571101 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.