OEM 2005 Chevrolet Corvette Dipstick Tube

2005 Chevrolet Corvette Dipstick Tube Parts Questions & Experts Answers

• Q: How to replace the Dipstick Tube and oil level indicator on 2005 Chevrolet Corvette?

  A: Begin the oil level indicator and tube replacement procedure by taking out both the oil level indicator and the oil level indicator tube bolt followed by removing the oil level indicator tube. The O-ring seal can be used again if it shows no signs of damage or cuts. The technician should remove the O-ring if it is needed to be changed for the oil level indicator tube. Clean engine oil must be used for lubricating the O-ring seal before you install the oil level indicator tube properly. Safely raise the vehicle before inserting the oil level indicator tube into the engine block until the collar matches the block surface then lower the vehicle. Secure the oil level indicator tube bolt with proper torque at 25 Nm (18 ft. lbs.). The last steps involve installing the oil level indicator while checking the oil level and adding oil if it requires any.