Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Bulb, Headlamp (High Beam); Headlight Bulbs; Car Bulbs; Headlight; Headlamp Bulb; High Beam; Composite Assembly; Fog Lamp/Turn Signal; Capsule Bulb
Item Weight: 0.40 Pounds
Item Dimensions: 4.2 x 2.2 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 9441732
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
2005 Chevrolet Monte Carlo Headlight Bulb
With a comprehensive array of OEM 2005 Chevrolet Monte Carlo Headlight Bulb, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Monte Carlo Headlight Bulb are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Chevrolet Monte Carlo Headlight Bulb Parts Questions & Experts Answers
Q: How to replace the front headlight bulb on 2005 Chevrolet Monte Carlo?
A: The first step to replace a headlamp bulb involves opening the hood and removing the radiator air baffle. You should apply gentle pressure on the lens of the headlamp to keep it stable as you take out its retainers before lifting the headlamp retainers free the headlamp from its position on the upper fascia support. Users must first extract the headlamp from slots inside the upper fascia support before disconnecting its electrical connector when removing the lamp from the vehicle. First you must remove the rubber access cover from the headlamp before using counterclockwise rotation to take out the bulb/socket and paying attention to the halogen bulb caution. Detach the electrical connector from the bulb socket system. After attaching the electrical connector to the bulb/socket you should return the instalment into the headlamp by rotating it in a clockwise direction. Before finishing the process replace the rubber access cover then connect the electrical connector to the headlamp unit. Return the headlamp into its position in the upper fascia support while using your hands to push retaining elements until they rest fully at the bottom before putting the radiator air baffle back. Complete the procedure by performing a necessary lamp aim check before you close the hood.