How to replace the power mirror switch on 2005 Chevrolet Venture?

Using a flat-bladed tool located at the switch mounting plate rear section will release the clip before snapping off the switch mounting plate from the front door trim panel. Remove electrical plugs before unsnapping the power mirror switch from its placement on the switch mounting plate. The power mirror switch installation starts by fitting the unit into the switch mounting plate followed by connector attachment. Secure the front part of the switch mounting plate to the front door trim panel by snapping both the front and rear edges.

OEM 2005 Chevrolet Venture Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2005 Chevrolet Venture Mirror Switch, Rear Passenger Side
Part Number: 9009914
Product Specifications
- Other Name: Switch, Outside Rear View Mirror Remote Control; Power Mirror Switch; Switch, Rear View Mirror
- Position: Rear Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9009914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Mirror Switch

With a comprehensive array of OEM 2005 Chevrolet Venture Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Parts Questions & Experts Answers

Q: How to replace the power mirror switch on 2005 Chevrolet Venture?
A: Using a flat-bladed tool located at the switch mounting plate rear section will release the clip before snapping off the switch mounting plate from the front door trim panel. Remove electrical plugs before unsnapping the power mirror switch from its placement on the switch mounting plate. The power mirror switch installation starts by fitting the unit into the switch mounting plate followed by connector attachment. Secure the front part of the switch mounting plate to the front door trim panel by snapping both the front and rear edges.