OEM 2005 Chevrolet Venture Rack and Pinion Boot

2005 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to replace the Rack and Pinion Boot on 2005 Chevrolet Venture?

  A: Starting the Rack and Pinion Boot replacement process i need these tools: keystone clamp pliers (J 22610). Keystone clamp pliers (J 22610). First separate the outer tie rod before undoing the hex jam nut installed on the inner tie rod assembly. Next, use side cutters to remove boot clamp from the Rack and Pinion Boot while discarding the old clamp. Next dispose of the Rack and Pinion Boot by detaching it from the Rack And Pinion gear assembly. New boot clamp installation on the Rack and Pinion Boot requires prior application of grease to both the inner tie rod assembly and Rack And Pinion gear assembly before positioning the new Rack and Pinion Boot onto the inner tie rod assembly. Make sure the Rack and Pinion Boot maintains a smooth shape without overlapping, distortions, or oddities. Twist the Rack and Pinion Boot into proper position with manual adjustment before placing it into the gear assembly groove. After Rack and Pinion Boot placement utilize keystone clamp pliers j 22610 for boot clamp installation followed by clamp crimping. Use plier pinch to set the tie rod end clamp before reinstalling the hex jam nut for the inner tie rod assembly followed by outer tie rod assembly installation.