How to Replace the Rear Brake Disc (Except Dual Wheels) on 2005 GMC Savana 3500?

Begin by releasing the park brake then safely elevating the vehicle for the replacement of rear brake rotors that exclude dual wheels. Mark the initial position of the rotor relative to the hub before you remove the tire assembly and wheel. A c-clamp tool j 41013 should compress brake caliper pistons before removing the caliper bracket assembly by wiring it to a support for hydraulic hose protection. Start by removing wheel-stud push nuts securing the rotor then strike either the rotor or hub with a deadblow hammer if needed for separation. Wipe down the hub/axle flange and brake rotor mating surfaces with cleaning tools from wheel hub resurfacing kit (J 42450-A) and rotor resurfacing kit (J 41013) to remove all rust and contaminants. Install the rotor in position while checking for debris along the mating surfaces. It is necessary to measure the lateral runout of the assembled rotor what exceeds specifications should be adjusted. Use the specified threadlocker gm p/n 12345493 (Canadian P/N 10953488) on the mounting bolts before you reinstall the caliper and bracket assembly and tighten them at the recommended torque values for your vehicle type. Reinstall the tire and wheel assembly while lowering the vehicle until the brake caliper pistons and pads seat correctly by performing brake pedal operations and then complete fluid preparation by adding clean brake fluid to the master cylinder reservoir.

OEM 2005 GMC Savana 3500 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Discs found

View related parts
2005 GMC Savana 3500 Rotor
Part Number: 15712803
$131.08 MSRP: $250.60
You Save: $119.52 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 30.00 Pounds
- Item Dimensions: 16.5 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15712803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 GMC Savana 3500 Rotor, Front
Part Number: 15942198
$172.25 MSRP: $334.32
You Save: $162.07 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060654
- Item Weight: 30.20 Pounds
- Item Dimensions: 14.2 x 13.8 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15942198
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 GMC Savana 3500 Rotor, Front
Part Number: 19210603
$94.27 MSRP: $182.96
You Save: $88.69 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060214
- Item Weight: 20.40 Pounds
- Item Dimensions: 13.4 x 13.0 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19210603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 GMC Savana 3500 Rotor, Front
Part Number: 84587921
$144.66 MSRP: $280.76
You Save: $136.10 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 15733625
- Item Weight: 31.60 Pounds
- Item Dimensions: 14.2 x 13.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 84587921
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS

2005 GMC Savana 3500 Brake Disc

With a comprehensive array of OEM 2005 GMC Savana 3500 Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Savana 3500 Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Savana 3500 Brake Disc Parts Questions & Experts Answers

Q: How to Replace the Rear Brake Disc (Except Dual Wheels) on 2005 GMC Savana 3500?
A: Begin by releasing the park brake then safely elevating the vehicle for the replacement of rear brake rotors that exclude dual wheels. Mark the initial position of the rotor relative to the hub before you remove the tire assembly and wheel. A c-clamp tool j 41013 should compress brake caliper pistons before removing the caliper bracket assembly by wiring it to a support for hydraulic hose protection. Start by removing wheel-stud push nuts securing the rotor then strike either the rotor or hub with a deadblow hammer if needed for separation. Wipe down the hub/axle flange and brake rotor mating surfaces with cleaning tools from wheel hub resurfacing kit (J 42450-A) and rotor resurfacing kit (J 41013) to remove all rust and contaminants. Install the rotor in position while checking for debris along the mating surfaces. It is necessary to measure the lateral runout of the assembled rotor what exceeds specifications should be adjusted. Use the specified threadlocker gm p/n 12345493 (Canadian P/N 10953488) on the mounting bolts before you reinstall the caliper and bracket assembly and tighten them at the recommended torque values for your vehicle type. Reinstall the tire and wheel assembly while lowering the vehicle until the brake caliper pistons and pads seat correctly by performing brake pedal operations and then complete fluid preparation by adding clean brake fluid to the master cylinder reservoir.