How to replace the front brake line on 2005 GMC Savana 3500?

Elevate the vehicle and its suspension before taking off the tire and wheel assembly for front brake hose replacement. Remove dirt from the brake hose end and brake pipe fitting then seal them with rubber caps to keep the system clean. Hold the ratchet in position by using a back up tool on the brake hose's end. This will release its connection to the brake pipe fitting. Connect the cap or plug onto the brake pipe. Set aside the brake hose mounting bracket clip then remove engine bracket bolts from the upper Control Arm and Steering Knuckle plus squeeze the brake caliper bracket bolt. Get rid of two gaskets since they have bonded to the caliper or brake hose ends. Use 2 new copper brake hose gaskets to assemble the brake hose into the bolt before connecting it to the brake hose. Install the brake hose to caliper bolt alongside 2 new washers to the brake caliper and tighten it to 44 nm (32 ft. Lbs.). Place the brake hose in position and secure both bolts to 10 nm (88 inch lbs.) by attaching the brake hose bracket bolt to the Steering Knuckle and upper Control Arm. Pull the brake hose through the bracket slot and fasten it using the retaining clip. Connect the brake pipe fitting by putting on a back up wrench and joining it to the brake hose. Use a smooth motion while fitting the components for optimal results. Avoid bending the brake fittings and ensure both parts apply proper torque of 25 nm (18 ft. Lbs.). First drain the brake fluid system then put back the tire and wheel assembly. Also check that the brake hose stays away from suspension and tire components during harsh maneuvers. Finally, lower the vehicle.

OEM 2005 GMC Savana 3500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Lines found

View related parts
2005 GMC Savana 3500 Flex Hose, Passenger Side
Part Number: 84286062
$20.48 MSRP: $38.44
You Save: $17.96 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 15823478, 15102361, 22844597, 25756666, 15878723, 20803179
- Item Weight: 1.10 Pounds
- Item Dimensions: 19.9 x 4.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84286062
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 GMC Savana 3500 Flex Hose, Front Passenger Side
Part Number: 84286064
$23.93 MSRP: $43.33
You Save: $19.40 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 15823492, 23189414, 25752975, 20852862
- Item Weight: 1.20 Pounds
- Item Dimensions: 34.6 x 3.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84286064
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 GMC Savana 3500 Flex Hose, Front Driver Side
Part Number: 84286063
$20.86 MSRP: $37.77
You Save: $16.91 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaces: 15823493, 23189415, 25752976, 20852863
- Item Weight: 1.30 Pounds
- Item Dimensions: 34.7 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84286063
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 GMC Savana 3500 Flex Hose, Rear Driver Side
Part Number: 19366777
$73.88 MSRP: $144.65
You Save: $70.77 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15117109, 15878725, 20830366, 15823480
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.1 x 3.0 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366777
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 GMC Savana 3500 Flex Hose, Front Passenger Side
Part Number: 19366787
$49.89 MSRP: $90.31
You Save: $40.42 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15823491, 20852861, 23189413
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 31.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 GMC Savana 3500 Flex Hose, Front Driver Side
Part Number: 19366788
$46.85 MSRP: $87.99
You Save: $41.14 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15823490, 20852864, 23189416
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 31.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366788
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 GMC Savana 3500 Flex Hose, Rear
Part Number: 19366785
$28.78 MSRP: $53.68
You Save: $24.90 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15102360, 15878722, 22803971
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.0 x 2.1 x 18.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366785
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

2005 GMC Savana 3500 Brake Line

With a comprehensive array of OEM 2005 GMC Savana 3500 Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Savana 3500 Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Savana 3500 Brake Line Parts Questions & Experts Answers

Q: How to replace the front brake line on 2005 GMC Savana 3500?
A: Elevate the vehicle and its suspension before taking off the tire and wheel assembly for front brake hose replacement. Remove dirt from the brake hose end and brake pipe fitting then seal them with rubber caps to keep the system clean. Hold the ratchet in position by using a back up tool on the brake hose's end. This will release its connection to the brake pipe fitting. Connect the cap or plug onto the brake pipe. Set aside the brake hose mounting bracket clip then remove engine bracket bolts from the upper Control Arm and Steering Knuckle plus squeeze the brake caliper bracket bolt. Get rid of two gaskets since they have bonded to the caliper or brake hose ends. Use 2 new copper brake hose gaskets to assemble the brake hose into the bolt before connecting it to the brake hose. Install the brake hose to caliper bolt alongside 2 new washers to the brake caliper and tighten it to 44 nm (32 ft. Lbs.). Place the brake hose in position and secure both bolts to 10 nm (88 inch lbs.) by attaching the brake hose bracket bolt to the Steering Knuckle and upper Control Arm. Pull the brake hose through the bracket slot and fasten it using the retaining clip. Connect the brake pipe fitting by putting on a back up wrench and joining it to the brake hose. Use a smooth motion while fitting the components for optimal results. Avoid bending the brake fittings and ensure both parts apply proper torque of 25 nm (18 ft. Lbs.). First drain the brake fluid system then put back the tire and wheel assembly. Also check that the brake hose stays away from suspension and tire components during harsh maneuvers. Finally, lower the vehicle.