Make sure this part fits

GM 19366788
Flex Hose, Front Driver Side

2003-2014 GM

Customer Questions & Expert Answers (23)
GM 19366788 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    15823490, 20852864, 23189416
  • Manufacturer
    General Motors
Make sure this part fits
$46.85 MSRP: $87.99
You Save: $41.14 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366788 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366788 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if the new pipe needs shaping for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Shape the new pipe with a suitable brake pipe bending tool if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose (Caliper) for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Raise and support the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you prepare the end of the brake pipe for flaring for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Select the appropriate size of brake pipe and tube nuts, strip the nylon coating from the end to be flared using the coating stripping tool from the J45405, and ensure all remnants of the coating are removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake hose for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Bleed the hydraulic brake system, then install the tire and wheel assembly, ensuring the brake hose does not contact any part of the suspension or tire/wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in the repair process for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Begin by inspecting the area to be repaired and releasing the brake pipe from retainers as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Use a backup wrench on the brake hose fitting end to disconnect it from the brake pipe fitting end, then cap or plug the brake pipe fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after removing the brake hose for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Assemble 2 new copper brake hose gaskets and the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose end and brake pipe fitting before disconnecting for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Clean all dirt and foreign material, then install a rubber cap or plug to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the brake hose to caliper bolt and gaskets for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the brake hose to caliper bolt from the brake caliper and discard the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the procedure for connecting the brake hose to the brake pipe fitting for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake pipe fitting end and connect it to the brake hose using a backup wrench, ensuring not to bend the mounting bracket or the brake pipe, and tighten to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in replacing a brake pipe for the 2007 Chevrolet Express 3500? Posted by Customer
    A:
    Inspect the area of the brake pipe to be replaced and release it from the retainers as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What components need to be removed after disconnecting the brake hose for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the brake hose retaining clip from the brake hose mounting bracket, the brake hose bracket bolt from the upper control arm and the steering knuckle, and the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be installed to the caliper for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Install the brake hose to the caliper bolt along with the 2 new washers, tightening the bolt to 44 Nm (32 ft. lbs.) while ensuring the brake hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose end and brake pipe fitting before disconnecting for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Clean all dirt and foreign material, and install a rubber cap or plug to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step after connecting everything for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Install the brake hose retaining clip to the hose mounting bracket, ensure the hose does not contact any part of the suspension, bleed the hydraulic brake system, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be used for installation of the new brake hose for the 2006 GMC Savana 3500? Posted by Customer
    A:
    2 new copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be installed to the caliper for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Install the brake hose to the caliper bolt along with the 2 new washers, tightening the bolt to 44 Nm (32 ft. lbs.) while ensuring the brake hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in the process for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Bleed the hydraulic brake system and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be installed to the caliper for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Install the brake hose to the caliper bolt with the 2 new washers, tightening to 44 Nm (32 lb ft), ensuring the hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose to the caliper for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Install the brake hose into the mounting bracket and the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake hose for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Remove the brake hose retaining clip from the brake hose mounting bracket, the brake hose bracket bolt from the upper control arm, and the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Driver Side 19366788 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366788 Flex Hose, Front Driver Side is available in the market under the name GM Brake Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366788 Flex Hose, Front Driver Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19366788 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Driver Side. The component 19366788 is constructed from durable material and its dimensions span 4.1 x 31.5 x 2.0 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366788 has available replacement options 15823490, 20852864, 23189416. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.