Make sure this part fits

GM 85569601
Caliper, Driver Side

2005-2020 GM

Customer Questions & Expert Answers (18)
GM 85569601 Caliper, Driver Side
  • Part Description
    Caliper Assembly-Front Brake (W/O Brake Pads & Bracket)
  • Position
    Driver Side
  • Replaces
    15904194, 23276878, 22842352, 84828460, 89059117, 23290149
  • Manufacturer
    General Motors
Make sure this part fits
$72.50 MSRP: $140.30
You Save: $67.80 (49%)
Core Charge: $40.00
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number85569601
    Part DescriptionCaliper Assembly-Front Brake (W/O Brake Pads & Bracket)
    Other NamesCaliper, Wheel Brake Cylinder/Caliper
    PositionDriver Side
    ConditionNew
    Replaces15904194, 23276878, 22842352, 84828460, 89059117, 23290149
    ManufacturerGeneral Motors
    SKU85569601
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2020 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2020 Cadillac Escalade ESVBase, Luxury, Platinum, Premium, Premium Luxury8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2015-2019, 2013 Cadillac XTSBase, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury6 Cyl 3.6 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2006 Chevrolet Avalanche 1500LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2009-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2009-2014 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2009-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2005-2019 Chevrolet Silverado 1500Base, Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, RST, SS, SSV, WT, XFE, Z71 Off-Road6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is 85569601 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 85569601 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake calipers on the 1500 Series on Cadillac Escalade? Posted by Customer
    A:
    The brake master cylinder reservoir needs to be checked before replacing the front brake caliper. Lower the fluid level down from the top mark to the midway point when it is at or above the midpoint level. Lift your car above ground then take off the tire components from the wheel assembly. Push down the caliper pistons through two large c-clamps until they move fully in and take off the clamps after completing the process. Apply protective measures before you clean visible dirt from brake caliper parts and seal off the brake hose with temporary devices. Take off the brake hose bolt and brake caliper while removing 2 copper brake hose gaskets before disconnecting the brake hose from its mount. Work with hand tools only when removing brake caliper bolts while the caliper guide pin fits into an open end wrench to shield the caliper parts from contact that may produce brake oscillation. Place the new caliper onto the bracket and bolt it in with installation torque of 100 n.m (74 lb ft). For correct installation keep the guide pins steady using an open end wrench. Repair the brake hose to its bolt on the caliper and tighten it at 40 n.m while bleeding the brake system. Fitting the tire and wheel parts back then topping up the master cylinder reservoir with fresh brake fluid when the fluid level needs to be restored.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake calipers on a 2500 Series on GMC Yukon? Posted by Customer
    A:
    The front brake caliper replacement process for a 2500 series vehicle begins with determining the fluid reserve level in the brake master cylinder reservoir; proceed only if the fluid sits at the midpoint between maximum-full and minimum allowance. The reservoir fluid should stay at the midpoint between the highest and lowest markings unless it is above which requires adjusting to midpoint. The vehicle needs to be elevated for support after which technicians need to disconnect the tire and wheel setup. Apply two big c-clamps across the brake caliper housing toward the outboard brake pad to compress its pistons until complete piston retraction occurs. Cleaning of the brake caliper while plugging or capping the brake hose prevents leaking followed by a check for any stray washers before they are discarded for new ones. Before installation replace the old brake hose with its existing 2 copper gaskets and then detach the brake hose to caliper bolt and brake hose itself from the system. You must never apply brake force with the rotors/calipers or drums free to protect the parts from damage. Remove the guide pin bolts from the brake caliper mount then detach the caliper from its bracket. The installation requires you to mount the new brake caliper onto the bracket while maintaining bracket focus using bolts tightened to 108 nm (80 lb ft). Copper brake hose gaskets should be installed on the Brake Caliper Bolt and hose before attaching them to the brake to caliper fitting while removing the plug or cap from the brake hose. Secure the brake hose to caliper bolt at a torque of 45 nm (33 lb ft) then bleed the brake system. Completing the installation requires one to reinstall the tire and wheel assembly and if needed, to fill the master cylinder reservoir with clean brake fluid up to the proper level.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, and fill the master cylinder reservoir to the proper level with clean brake fluid if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after cleaning and capping the brake hose for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Remove the brake hose to caliper bolt, then detach the brake hose from the caliper and discard the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the brake hose for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the rubber cap from the brake hose fitting, install 2 NEW copper gaskets, and secure the brake hose to caliper bolt, tightening it to 40 N.m (30 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after inspecting the fluid level for the 2007 Cadillac Escalade ESV? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done to prevent fluid loss and contamination for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Clean the brake hose end and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do to prevent fluid loss and contamination for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Clean the area around the brake hose fitting and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to replace the rear brake caliper for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you compress the brake caliper pistons for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Use 2 large C-clamps placed over the top of the caliper housing against the back of the outboard pad, tightening them until the pistons are fully retracted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step in overhauling the rear brake caliper for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Begin by removing the brake caliper while ensuring a clean workspace free from mineral oil materials.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the brake hose for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake hose fitting, install two new copper brake hose gaskets, and attach the brake hose to caliper bolt, tightening it to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do after securing the new brake caliper for the 2008 GMC Yukon? Posted by Customer
    A:
    Remove the cap or plug from the brake hose fitting, install 2 new copper brake hose gaskets, and reattach the brake hose to caliper bolt, tightening it to 45 N.m (33 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you remove the brake caliper for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the brake caliper guide pin bolts and take off the brake caliper from the mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to replace the rear brake caliper for the 2010 GMC Yukon? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do to prevent fluid loss and contamination for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Clean the area around the brake hose fitting and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done with the caliper bores and piston before installation for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Lubricate the caliper bores and piston with brake fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 85569601, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 85569601 Caliper, Driver Side. It is sometimes referred to as GM Brake Caliper Repair Kit, GM Brake Calipers. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 85569601 Caliper, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery