How to replace the rear brake line (Jounce) on 2004 GMC Savana 3500?

The procedure to replace the rear brake hose (Jounce) requires users to first raise their vehicle and then remove all tire and wheel assemblies. Thoroughly clean all foreign substances from the brake hose fittings as well as from the brake pipe components. You should detach the brake pipe fitting from the brake hose by using a back up wrench while capping or plugging the brake pipe end. First remove the supporting clip from the brake hose bracket and extract the jounce hose from its tab while using rubber pieces to seal the exposed brake pipe ends from moisture and contaminants. Department procedure indicates next to separate the brake hose to caliper bolt from the brake caliper before discarding the 2 stuck copper brake hose gaskets found either on the brake caliper housing or brake hose end. Install two new copper brake hose gaskets before uniting them with the brake hose bolt to the brake hose. Attach the brake hose with new washers to the caliper bolt before tightening this bolt to 44 nm (32 ft. Lbs.) the brake hose installation requires no twisting or contact with suspension parts during fitting. Use a back up wrench to connect the brake pipe fitting to the brake hose while ensuring you avoid bending either the bracket or pipe. Tighten the fitting to 25 nm (18 ft. Lbs.). After installing the brake hose retaining clip to its bracket position you should confirm the hose stays clear of all suspension components then bleed the brake system before lowering the vehicle.

OEM 2004 GMC Savana 3500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Lines found

View related parts
2004 GMC Savana 3500 Flex Hose, Passenger Side
Part Number: 84286062
$20.48 MSRP: $38.44
You Save: $17.96 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 15823478, 15102361, 22844597, 25756666, 15878723, 20803179
- Item Weight: 1.10 Pounds
- Item Dimensions: 19.9 x 4.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84286062
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2004 GMC Savana 3500 Flex Hose, Front Passenger Side
Part Number: 84286064
$23.93 MSRP: $43.33
You Save: $19.40 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 15823492, 23189414, 25752975, 20852862
- Item Weight: 1.20 Pounds
- Item Dimensions: 34.6 x 3.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84286064
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2004 GMC Savana 3500 Flex Hose, Front Driver Side
Part Number: 84286063
$20.86 MSRP: $37.77
You Save: $16.91 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaces: 15823493, 23189415, 25752976, 20852863
- Item Weight: 1.30 Pounds
- Item Dimensions: 34.7 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84286063
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2004 GMC Savana 3500 Flex Hose, Rear Driver Side
Part Number: 19366777
$73.88 MSRP: $144.65
You Save: $70.77 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15117109, 15878725, 20830366, 15823480
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.1 x 3.0 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366777
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2004 GMC Savana 3500 Flex Hose, Front Passenger Side
Part Number: 19366787
$49.89 MSRP: $90.31
You Save: $40.42 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15823491, 20852861, 23189413
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 31.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2004 GMC Savana 3500 Flex Hose, Front Driver Side
Part Number: 19366788
$46.85 MSRP: $87.99
You Save: $41.14 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15823490, 20852864, 23189416
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 31.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366788
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2004 GMC Savana 3500 Flex Hose, Rear
Part Number: 19366785
$28.78 MSRP: $53.68
You Save: $24.90 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15102360, 15878722, 22803971
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.0 x 2.1 x 18.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366785
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 GMC Savana 3500 Submodels:
- Base, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

2004 GMC Savana 3500 Brake Line

With a comprehensive array of OEM 2004 GMC Savana 3500 Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 GMC Savana 3500 Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 GMC Savana 3500 Brake Line Parts Questions & Experts Answers

Q: How to replace the rear brake line (Jounce) on 2004 GMC Savana 3500?
A: The procedure to replace the rear brake hose (Jounce) requires users to first raise their vehicle and then remove all tire and wheel assemblies. Thoroughly clean all foreign substances from the brake hose fittings as well as from the brake pipe components. You should detach the brake pipe fitting from the brake hose by using a back up wrench while capping or plugging the brake pipe end. First remove the supporting clip from the brake hose bracket and extract the jounce hose from its tab while using rubber pieces to seal the exposed brake pipe ends from moisture and contaminants. Department procedure indicates next to separate the brake hose to caliper bolt from the brake caliper before discarding the 2 stuck copper brake hose gaskets found either on the brake caliper housing or brake hose end. Install two new copper brake hose gaskets before uniting them with the brake hose bolt to the brake hose. Attach the brake hose with new washers to the caliper bolt before tightening this bolt to 44 nm (32 ft. Lbs.) the brake hose installation requires no twisting or contact with suspension parts during fitting. Use a back up wrench to connect the brake pipe fitting to the brake hose while ensuring you avoid bending either the bracket or pipe. Tighten the fitting to 25 nm (18 ft. Lbs.). After installing the brake hose retaining clip to its bracket position you should confirm the hose stays clear of all suspension components then bleed the brake system before lowering the vehicle.