Make sure this part fits

GM 19366787
Flex Hose, Front Passenger Side

2003-2014 GM

Customer Questions & Expert Answers (23)
GM 19366787 Flex Hose, Front Passenger Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Passenger Side
  • Replaces
    15823491, 20852861, 23189413
  • Manufacturer
    General Motors
Make sure this part fits
$49.89 MSRP: $90.31
You Save: $40.42 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366787 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366787 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What type of brake pipe should be used to prevent brake system failure for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Double-walled steel brake pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake hose for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Bleed the hydraulic brake system, then install the tire and wheel assembly, ensuring the brake hose does not contact any part of the suspension or tire/wheel assembly, and inspect the brake hose during extreme right and left turns.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Use a backup wrench on the hose fitting to disconnect it and cap or plug the brake pipe fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done if sectioning the brake pipe for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Use a replacement pipe of the same type and outside diameter, and fittings of the appropriate size and type, creating flares that match the original design.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Use a backup wrench on the brake hose fitting end to disconnect it and cap or plug the brake pipe fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after installing the new brake pipe for the 2007 Chevrolet Express 3500? Posted by Customer
    A:
    Install the pipe with the appropriate unions, secure it to the retainers, bleed the hydraulic brake system, and check for leaks with assistance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake hose to the brake pipe fitting for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the rubber cap or plug from the exposed brake pipe fitting end and connect it to the brake hose using a backup wrench, ensuring not to bend the mounting bracket or the brake pipe, and tighten the brake pipe fitting end to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final connection step for the brake hose for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Insert the brake hose into the brake hose bracket, install the brake hose retaining clip, remove the rubber cap or plug from the brake pipe fitting end, and connect it to the brake hose using a backup wrench, tightening the brake pipe fitting end to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose (Caliper) for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Raise and support the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose (Caliper) for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Raise and support the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you create the flare on the brake pipe for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Install the corresponding die set, insert the prepared end of the pipe into the dies, and operate the lever of the J45405.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you connect the brake hose to the brake pipe fitting for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Remove the rubber cap or plug and connect it to the brake hose using a backup wrench, ensuring not to bend the mounting bracket or the brake pipe, and tighten to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is required for installation of the new brake hose for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Use 2 new copper brake hose gaskets and assemble them with the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the brake pipe fitting for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Tighten it to 25 N.m (18 lb ft) without bending the bracket or the pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose connected to the caliper for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What final checks should be performed for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Inspect the brake hose during extreme right and left turns, correcting any contact issues, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the brake hose to caliper bolt for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Remove it and discard the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the installation process for the new brake hose for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Assemble 2 new copper brake hose gaskets and the brake hose bolt to the brake hose, then install the brake hose to caliper bolt and 2 new washers to the brake caliper, tightening the bolt to 44 N.m (33 lb ft) while ensuring the brake hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after removing the brake hose for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Install 2 new copper brake hose gaskets and assemble them with the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Passenger Side 19366787 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366787 Flex Hose, Front Passenger Side is available in the market under the name GM Brake Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366787 Flex Hose, Front Passenger Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19366787 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Passenger Side. The component 19366787 is constructed from durable material and its dimensions span 4.2 x 31.8 x 2.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366787 has available replacement options 15823491, 20852861, 23189413. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.