Make sure this part fits

GM 19366777
Flex Hose, Rear Driver Side

2003-2016 GM

Customer Questions & Expert Answers (23)
GM 19366777 Flex Hose, Rear Driver Side
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear Driver Side
  • Replaces
    15117109, 15878725, 20830366, 15823480
  • Manufacturer
    General Motors
Make sure this part fits
$73.88 MSRP: $144.65
You Save: $70.77 (49%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2016 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2016 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2016 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2016 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366777 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366777 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you measure the length of the pipe to be replaced for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Measure the length of the pipe to be replaced, adding the necessary length for flares: 6.35 mm (0.250 in) for 4.76 mm (3/16 in) diameter pipe, 9.50 mm (0.374 in) for 6.35 mm (1/4 in) diameter pipe, and 12.67 mm (0.499 in) for 7.94 mm (5/16 in) diameter pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake pipe and the J 45405 be prepared before flaring for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Clean them of any contaminants, loosen the die clamping screw, and install the corresponding die set into the die cage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose end and brake pipe fitting before disconnecting for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Clean all dirt and foreign material, and install a rubber cap or plug on the exposed brake pipe fitting end to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after measuring the length of the pipe to be replaced for the 2007 Chevrolet Express 3500? Posted by Customer
    A:
    Add the necessary length for flares based on the pipe diameter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the installation process for the new brake hose for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Assemble 2 new copper brake hose gaskets and the brake hose bolt to the brake hose, then install the brake hose to caliper bolt and 2 new washers to the brake caliper, tightening the bolt to 44 N.m (32 lb ft) while ensuring the brake hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake pipe fitting for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the brake hose retaining clip and the brake hose from the mounting bracket, followed by the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after cutting the brake pipe for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose end and brake pipe fitting before disconnecting for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Clean all dirt and foreign material from the brake hose end and brake pipe fitting, and install a rubber cap or plug on the exposed brake pipe fitting end to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is involved in the installation process of the new brake hose for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Assemble 2 new copper brake hose gaskets and the brake hose bolt to the brake hose, then install the brake hose to caliper bolt and 2 new washers to the brake caliper, tightening to 44 Nm (32 lb ft) while ensuring the brake hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose to the caliper for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Install the brake hose into the mounting bracket and the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake hose for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the brake hose retaining clip from the mounting bracket and take out the brake hose from the bracket and the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to prevent brake fluid loss and contamination for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Install a rubber cap or plug to the exposed brake pipe fitting ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be installed to the caliper for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Install the brake hose to the caliper bolt along with the 2 new washers, tightening the bolt to 44 N.m (32 lb ft) while ensuring the brake hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose and brake pipe fittings before disconnecting for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Clean all dirt and foreign material from the brake hose and brake pipe fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step before connecting the brake hose for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Insert the brake hose into the brake hose bracket and install the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake hose for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Remove the brake hose retaining clip from the mounting bracket, then take out the brake hose from the bracket and the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done before disconnecting the brake pipe fitting for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Clean all dirt and foreign material from the brake hose and brake pipe fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be confirmed after reinstalling the tire and wheel assembly for the 2006 GMC Savana 3500? Posted by Customer
    A:
    That the brake hose does not contact any part of the suspension or the tire/wheel assembly. If it does, correct the issue before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose to the caliper for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Install the brake hose to the bracket, remove the rubber cap or plug, and connect the brake pipe fitting to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be positioned during installation for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Ensure the brake hose is not twisted or in contact with any suspension component.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose end and brake pipe fitting before disconnecting for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Clean any dirt from the brake hose end and brake pipe fitting, and install a rubber cap or plug on the exposed brake pipe fitting to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear Driver Side 19366777 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366777 Flex Hose, Rear Driver Side is available in the market under the name GM Brake Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366777 Flex Hose, Rear Driver Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19366777 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear Driver Side. The component 19366777 is constructed from durable material and its dimensions span 5.1 x 3.0 x 20.8 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366777 has available replacement options 15117109, 15878725, 20830366, 15823480. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.