OEM 2005 GMC Savana 3500 Oil Filter

2005 GMC Savana 3500 Oil Filter Parts Questions & Experts Answers

• Q: How to replace the engine oil and oil filter on 2005 GMC Savana 3500?

  A: The procedure to replace engine oil and Oil Filter begins with hood opening to remove the oil fill cap. Peter your vehicle properly before installing an oil drain pan under the drain oil plug of the Oil Pan. The complete draining process requires removal of the Oil Pan Drain Plug but keep the bottom of the Oil Pan flat. You should first wipe oil debris from the Drain Plug opening before removing the Oil Filter from the engine block. Make sure the old filter seal does not stay on the engine block. After wiping clean the Oil Filter mounting you should apply engine oil to the new Oil Filter seal before installing and tightening it to 30 nm (22 ft. Lbs.). Proceed to handle the oil Drain Plug installation by tightening it to 25 nm (18 ft. Lbs.) level while the vehicle remains below. Place the correct amount of specified engine oil then remove the oil indicator and clean it before restating it. The hood can be shut after confirming the oil level through the indicator and making oil additions if needed.