OEM 2006 Buick Rendezvous Washer Reservoir

2006 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the washer reservoir on 2006 Buick Rendezvous?

  A: Begin washer solvent replacement by unplugging the battery and draining the solvent from the holder. Detach these components to work on the washer solvent container: level sensor electrical plug and back washer pump electrical interface (if it has one) as well as washer hose from the back washer pump. Start by detaching the electrical connector from the front washer pump plus removing the front washer hose. To get the washer solvent container out of the vehicle you must unscrew its mounting screws and pull it away. Install the washer solvent container into the right engine compartment and tighten screw fasteners to 10 n.m (89 lb in). Connect back the washer solvent container level sensor electrical plug, the rear washer pump electrical connection, and attach the washer hose to the rear washer pump. You need to attach the front washer pump electrical cable and front washer pipe to the unit. Insert washer solvent into the container and put back your battery.